ShyKaiju
12-30-2015, 05:37 AM
Hey everybody, I'm moving states away within the next two months. TX to CT. and I'm trying to pack as light as possible.
Is there anybody out there that would like to purchase actual molds?
Premade molds:
Fiberglass 'Dragon' Fluke mold. Fiberglass curing messed up, causing it to be slightly flexible, but DS will cure just fine! Asking $150. This is a personal design, so I'm also selling the rights to reproduce for commercial purposes :)!
Two silicone seashell molds. One of a lionpaw for small bras, and a huge clamshell for bigger bras. (Clamshell can fit C-DD)
Asking $80 for both. Can be useable with DS or Resin. Made with Rebound 25
Made to order..ish?:
I have a large scale mold that I'm currently in the middle of working on for body scales. To be made out of fiberglass.
Scales were made from punching foam teadrops, so they have a very nice even shape to them. Some of the scales have scarring/ scallops for a more realistic look. I can ship anywhere in the USA. Saves you the hassle of punching scales, and working with the hazardous chemicals of fiberglass. You can start to pour scales right away with DS. Asking $350
I'm willing to bundle all molds for $500 + Shipping. Basically throwing in the seashell molds for free. This would be a quick way to jumpstart a tail making business, or a cheaper route for making your own tail. These prices are pretty barebottom as I can get, but you're welcome to make me an offer. Due to the size of these molds, I won't ship outside the usa. Sorry! :C!
*I'll edit this post with pictures when the sun comes up!
seashell molds - http://i.imgur.com/zXgrR4t.jpg
They don't have a mothermold to them, but I can create one. The larger shell needs it, its.. huge. I got that one to cover a DD bra, and it engulfs it XD *Side Note on the larger seashell - When I molded it, I thought it was a real shell painted gold. I am now aware its a resin cast. In good conscious, I must tell you that if you buy this seashell, please do not use it for commercial purposes. I don't know where the original came from. The lionpaw shell however, IS REAL, and therefore free to use!
Fluke mold - http://i.imgur.com/sDBdybm.jpg
This mold looks way worse than it actually is. I had some problems with the resin, so some of it seeped down underneath a layer of clay. You can't get it out, but I was going for a 'sea monster skin/webbing look anyway so its actually pretty nice texturing lol. There are a few holes in the mold from airbubbles, but these can be trimmed off easily! I wasn't really concerned about the look of the mold since it was my personal mold, but I was able to cast into it just fine. This is easily 3ft x 2ft or more. It was sculpted over a finis wave, but you can fit a rapid/foil by trimming the monofin.
http://i.imgur.com/QUTQL9z.jpg - This is the sculpt.
The scale mold is being made from foam punches scales. This mold is the one that will be made.
http://i.imgur.com/q9HrhKy.jpg <-- Here is an idea of what they look like.
The scale mold will be much nicer looking than the fluke mold does. Again fluke was my personal mold, and I didn't really care how it looked as long as it did its job. The scale mold will be more on par with my professional mold making. http://i.imgur.com/MIpawjb.jpg (Minus silicone)
Is there anybody out there that would like to purchase actual molds?
Premade molds:
Fiberglass 'Dragon' Fluke mold. Fiberglass curing messed up, causing it to be slightly flexible, but DS will cure just fine! Asking $150. This is a personal design, so I'm also selling the rights to reproduce for commercial purposes :)!
Two silicone seashell molds. One of a lionpaw for small bras, and a huge clamshell for bigger bras. (Clamshell can fit C-DD)
Asking $80 for both. Can be useable with DS or Resin. Made with Rebound 25
Made to order..ish?:
I have a large scale mold that I'm currently in the middle of working on for body scales. To be made out of fiberglass.
Scales were made from punching foam teadrops, so they have a very nice even shape to them. Some of the scales have scarring/ scallops for a more realistic look. I can ship anywhere in the USA. Saves you the hassle of punching scales, and working with the hazardous chemicals of fiberglass. You can start to pour scales right away with DS. Asking $350
I'm willing to bundle all molds for $500 + Shipping. Basically throwing in the seashell molds for free. This would be a quick way to jumpstart a tail making business, or a cheaper route for making your own tail. These prices are pretty barebottom as I can get, but you're welcome to make me an offer. Due to the size of these molds, I won't ship outside the usa. Sorry! :C!
*I'll edit this post with pictures when the sun comes up!
seashell molds - http://i.imgur.com/zXgrR4t.jpg
They don't have a mothermold to them, but I can create one. The larger shell needs it, its.. huge. I got that one to cover a DD bra, and it engulfs it XD *Side Note on the larger seashell - When I molded it, I thought it was a real shell painted gold. I am now aware its a resin cast. In good conscious, I must tell you that if you buy this seashell, please do not use it for commercial purposes. I don't know where the original came from. The lionpaw shell however, IS REAL, and therefore free to use!
Fluke mold - http://i.imgur.com/sDBdybm.jpg
This mold looks way worse than it actually is. I had some problems with the resin, so some of it seeped down underneath a layer of clay. You can't get it out, but I was going for a 'sea monster skin/webbing look anyway so its actually pretty nice texturing lol. There are a few holes in the mold from airbubbles, but these can be trimmed off easily! I wasn't really concerned about the look of the mold since it was my personal mold, but I was able to cast into it just fine. This is easily 3ft x 2ft or more. It was sculpted over a finis wave, but you can fit a rapid/foil by trimming the monofin.
http://i.imgur.com/QUTQL9z.jpg - This is the sculpt.
The scale mold is being made from foam punches scales. This mold is the one that will be made.
http://i.imgur.com/q9HrhKy.jpg <-- Here is an idea of what they look like.
The scale mold will be much nicer looking than the fluke mold does. Again fluke was my personal mold, and I didn't really care how it looked as long as it did its job. The scale mold will be more on par with my professional mold making. http://i.imgur.com/MIpawjb.jpg (Minus silicone)