Mermaid Keena's First Ever Silicone Tail

[Mermaid Keena]

Good (super early) Morning from near Perth Western Australia! Its currently 12.07am and I cannot sleep because I am super excited!! HAHA!! I've FINALLY, after about two years, decided to go for it and make a silicone tail myself! I have NEVER worked with silicone or fibreglass before so It is a huge learning curve! I'm super excited.

I've already started with my scale sheet and my scale tester sheet. That is all done!

36098

CHECK!

I have done two trials of molding techniques one just fiberglass:

Equipment:
36099

Safety gear on:
36100

Resin and Matting done:
36101

Now just the wait to see if it worked.....
The Reveal:
36102

So something went wrong - I think I didn't put enough resin on to soak the matting or I should've searched for some gelcoat!

NO PROBLEMS! I figured I will just try a different way!! Plaster of paris isn't "that" expensive....

36103
Waiting, waiting... OH! I wonder if fiberglass will stick to the back to make it a bit stronger???

36104
I did not skimp with the resin this time! I put heaps on there!!

Wait for the fiberglass to set....

36105

Awww yay!! It looks gorgeous! I cant wait to see how the hole turns out when I silicone test it!! BUT the fiberglass just pulled right off! So I think I'm going to find an aviary wire, from the hardware store, for my big sheet to keep the plaster strong! I'm sure I saw someone do that somewhere!!

(unless someone can let me know how to get the fiberglass to stick to the plaster?)

I now have a fiberglass and a plaster mold to test my silicone in, but no $$ to buy it... hahahahaha! NO PROBLEMS! I'll just start some designing and sketching.

I did a few sketches based on moths, butterflies, flowers and fairies and I did even do some underwater critters amazingly! So here are a few sketches:
36108

I think you may be able to see a colour trend? I love pinks and purples and I thought to add black (slimming) and a pop of blue or green to contrast!

I finally came up with this design!! I love it! Also it doesn't seem to crazy!

36106
Not sure if I want the "seaweed" blue (it was supposed to be a dark purple pencil -_-) or purple or even a random green haha. Thanks to The beautiful Mers at Tiggs tails for the top inspiration And Merbella Studios for the fins on the tops (thats where I first saw it and it looked AHMAYZING!)! Also on here is a thread by Jessica on how to do scale tops!! THANK YOU SO MUCH! I had no idea how to hide these HUGE boobies and keep it decent! (18F over here -_-)

36107
If you can't see the colours properly I'm sorry - its just pencil haha. For the tail its going to start off bright blue -> pink -> purple - > dark purple - >black. then the fluke is going to be the other way: Black -> dark purple -> purple -> pink -> Bright blue. Also the side fins will all be the same size (saves molding HEAPS!) and the hip fins will match the top fins!

So I think that's where I am at so far! I think I may be buying my silicone from Barnes? not 100% sure it depends on pricing plus shipping. But not 100% sure where to get my pigments from and what the definitely shouldn't have in them (I know some will inhibit curing!)

So excited to start molding my hip and side fins! Getting some plasticine ASAP because the Air dry clay the art store suggested was sooooooo frustrating and super messy hahahaha AND it broke when it dried!! ARGH!

I best head to bed - we have a big family day tomorrow! Hubby to be and I are taking our two boys up to see Mermaid Amelia and Mermaid Jessica Pearl at Elizabeth Quay! (My boys both want to be merfolk when they can swim - my Eldest is 5 and he's colouring my designs and trying to figure out what he wants his tail to look like! My youngest is nearly 3!!)

[Mermaid Keena]

Just ordered my Testing Silicone (Vario 15) and some pigments from TKB trading =D by some I mean like 15 or so different micas!!! haha I cant wait for them to get here!

[Mermaid Keena]

I played with some Plasticine this afternoon =D I think it turned out pretty good for some hip fins and from out of the top =D

36145
36146
36147

compared to my hand: 36148

Something else I am trying: 36149

[Rett]

Wow! You look to be off to a super fantastic start! Love your inspiration designs! Cant wait to see your finished tail!

[PearlieMae]

Going to watch your progress in this! :mermaid kiss:

[MermaidRainne]

Can't wait to see it finished!

[Mermaid Keena]

Awww thanks everyone!! I cant wait for the testing stage haha all the pretty colours coming!!

Sent from my HUAWEI Y360-U03 using Tapatalk

[Mermaid Keena]

36360

My drawn out fluke! My monofin goes just over the yellow and white join. Also the two shorter fins have no monofin in it at all so it will hopefully be flowy.

36361

I think I need to make the shorter fins a bit longer to balance it out more.

I also did some work on my side fins.. but didnt like them ahaha


Sent from my HUAWEI Y360-U03 using Tapatalk

[Luna Dreamtide]

I really like your fluke design! Your progress is looking great. :)

[Mermaid Wesley]

Awesome! Can't wait to see this unfold!


Sent from my iPhone using Tapatalk

[Mermaid Keena]

I cant wait either!! *be patient Keena!! *

I like these A LOT more!!

36362

Apologies if pics are big - I am sending them straight from my phone so cant check actual size!

Sent from my HUAWEI Y360-U03 using Tapatalk

[Mermaid Keena]

Using homemade play dough instead of Plasticine:

36363

36364

36365

So much more fun than i expected!!! Hahaha

Sent from my HUAWEI Y360-U03 using Tapatalk

[Mermaid Keena]

36366

Fingers crossed these work too!!!

Sent from my HUAWEI Y360-U03 using Tapatalk

[Mermaid Keena]

Fins:

36367

Detail:

36368

Shells and seaweed:

36369

[emoji7] [emoji7] [emoji7]

Sent from my HUAWEI Y360-U03 using Tapatalk

[Mermaid Keena]

36359

Silicone test is here!!! Now to re order the mica pigments this weekend (had to cancel due to USD vs AUD conversion haha)

Would eyeshadow make up work as pigment? I just want to start testing!! haha

Sent from my HUAWEI Y360-U03 using Tapatalk

[Luna Dreamtide]

I'm pretty sure people have used eyeshadows with success.
I also know you need to be so careful with the mix ratio of that silicone.

[Mermaid Keena]

It seems pretty simple 100:10 which i can wrap my brain around Lol but not sure about adding the pigments! So fingers crossed! Thanks Leina :)

Sent from my HUAWEI Y360-U03 using Tapatalk

[Luna Dreamtide]

For the silicone you got, I'd probably add the pigment to the part that you need more of and then combine them and mix. Then you wouldn't have to worry about it starting to set while you're trying to mix the colour through. :) just a thought

[Mermaid Keena]

Awesome thats what i thought i would do :D thanks for your help!!! <3

Sent from my HUAWEI Y360-U03 using Tapatalk

[Mermaid Keena]

I ordered some mica pigments to test out! I am SUPER excited!! I got 10 for AUD$22.60 (including postage). Much better price! HAHAHA joys of ordering from your own country!!

These are the colours I ordered:

36370

I cant wait to see how they turn out! I'm planning on using the Intense sparkle white or the shimmer violet in the "slime coat" for extra sparkles! (if it stays kind of transparent) I cant wait to try them out. Should be here by the 7th April at the latest! Which is Thursday - so I'll be able to donate my plasma then do some tests while my mum has the boys! YAY!

[WaterDragon]

the image isn't working for me :(

[Shyren Shey]

Good luck! I can't wait to see your test pulls~

[Mermaid Keena]

Weird it didnt work on my tapatalk either I'll try fix it tonight x

Sent from my HUAWEI Y360-U03 using Tapatalk

[Mermaid Keena]

http://uploads.tapatalk-cdn.com/20160405/5eea572d06fe7ee7f0d6f9932b3e669b.jpg

Sorry if huge but i just did it through my phone x

Sent from my HUAWEI Y360-U03 using Tapatalk

[WaterDragon]

ah, thats better.

Love the colors.

[Ashton]

those color images are funny. It's like "here is the pigment..." and then the person got distracted by the pretty colors and had to put their hand in it. Now the image is "here is the pigment... and my hand in it" lol
[I know it is to show off the color]

[Mermaid Keena]

Bahahaha yep weird people!!

Sent from my HUAWEI Y360-U03 using Tapatalk

[Mermaid Keena]

The pigments have arrived!! NOW im freaking out about trying the silicone hahaha #nervousnelly -_-

Sent from my HUAWEI Y360-U03 using Tapatalk

[Mermaid Keena]

http://uploads.tapatalk-cdn.com/20160407/18a44bdb9747936afd3459237b439b1a.jpg

I mixed up all the blues plus shimmer violet and black in the side that looks green. The purple side has all the pinks/purples and the intense white.

Just to see if they'd cure.

Then i did peach pink and made a shell and brightest blue and made a shell then poured on the leftovers.

http://uploads.tapatalk-cdn.com/20160407/68d84fdfa47d7ea3bceba04b63a2d910.jpg

Sent from my HUAWEI Y360-U03 using Tapatalk

[Mermaid Mystery]

Three of my favorite colors! So excited to see this!

[The Water Phoenix]

Looks awesome Keena! :) Can't wait to see it finished!

[Mermaid Keena]

Sooo i did my testers too thin and they ripped but no problem because THEY CURED!! (Except the bright blue but that was due to a measuring error) so im trying it out on my hip fin mold and im going to do it a bit thicker haha waiting for this layer to cure then ill add one in the morning =) im super excited!!!

Sent from my HUAWEI Y360-U03 using Tapatalk

[Mermaid Keena]

Close up of pulled hip fin:

http://uploads.tapatalk-cdn.com/20160407/6d3fe64f585708f6e03686a13e0ae702.jpg

Hip fin: (most will be hidden under scales)
http://uploads.tapatalk-cdn.com/20160407/b2ba88dbe815775608757a9724685d14.jpg

Sent from my HUAWEI Y360-U03 using Tapatalk

[Mermaid Keena]

Came out MUCH easier!!

Sent from my HUAWEI Y360-U03 using Tapatalk

[The Water Phoenix]

Very pretty!

[Mermaid Keena]

Re did scales testers
36405

Glittery "slime coat" with shimmer violet
36406

Sent from my HUAWEI Y360-U03 using Tapatalk

[The Water Phoenix]

Gorgeous Keena!

[Mermaid Keena]

Thank you!! Im loving it so much!! Haha now to figure out how to stop the pink being see through! Maybe more pigment?

Sent from my HUAWEI Y360-U03 using Tapatalk

[Shyren Shey]

Super pretty with the slime coat ~

Sent from my SM-N920P using Tapatalk

[Mermaid Keena]

Yeah it adds something special

Sent from my HUAWEI Y360-U03 using Tapatalk

[Mermaid Keena]

HELP!!! I have no idea why my top coat is doing this!!

3645036451

It's only happening to my scale testers. Do you have any ideas?

[The Water Phoenix]

Did you use a different silicone for the top coat? Silicone should bond to silicone. That's really odd, I haven't had any problem with mine.

[Mermaid Keena]

nope its the same silicone. I was thinking maybe something got on the cured silicone before i coated it. :S

[The Water Phoenix]

I think Perth's dodgy weather at the moment has something to do with it :3

[Ashton]

Did you add any type of thinner? I have seen something like that happen when people use xylene.

[PearlieMae]

A: Your topcoat is too thin.

B: Did you properly clean it before coating it?

• Wash the cured silicone with water and dishsoap (Dawn original blue - do you have that in Australia? - is the best for this), rinse it well with clear water and let dry.

• Then wipe it all down again with isopropyl alcohol, the highest percentage you can get...91% is what I use...Let it dry.

• Try not to handle the silicone much, the oils from your hands will affect adhesion.

• A generous topcoat will look milky; too thin, and it will peel. Try a couple of thin coats to keep the topcoat clear. You don't have to clean between coats if you do them in quick succession and don't handle the new silicone too much.

• Work in small patches at a time.

PS: Let it cure a couple of days before handling to give the new silicone time to cure completely.

Hope this helps! Patch test the process in case it's something else. :mermaid kiss:

[HamptonsMermaid]

PearlieMae to save the day!

[Mermaid Keena]

Thank you Pearlie!! <3 i will give it another go using your tips 😁😘

Sent from my HUAWEI Y360-U03 using Tapatalk

[Mermaid Keena]

Trying again =D
Base scales:
36505

Then I "thought" I was adding Intense sparkles.... The white part didnt register'in my brain so I assumed it was going to just be super sparkly... I was wrong.
36506

So I'm now seeing how well the sparkly white blends with the pink I've decided on. I'm also trying to see how see through it is! I might be doing white down the middle front of my tail - if this actually works. (yep the pink does look blue in this picture - but it depends on the lighting haha)
36507

[Mermaid Keena]

pulled:
36510
36511
Still need to slime coat it =D to finish it off, but I achieved what I wanted - the white is not see through AND it is super sparkly!

[HamptonsMermaid]

Nice! So is that white glitter you added, not white pigment?

[PearlieMae]

So pretty!!!!

[Mermatron Athena]

It looks like white pearl mica to me. I have at least 6 oz of it (I make makeup, and toiletries) so if it works for tails I will be super happy!

[Kait]

So sparkly :swoon::swoon:

[Mermaid Keena]

Nice! So is that white glitter you added, not white pigment?
I thought it was white glitter. But it was actually white pigment with a lot of glitter haha

Sent from my HUAWEI Y360-U03 using Tapatalk

[Mermaid Keena]

Actually re thinking my design again now haha I've got until September/October before i need to finalise colours anyway :'D but pink and white would look so pretty!

Sent from my HUAWEI Y360-U03 using Tapatalk

[Mermaid Keena]

Apologies in advance for big pictures but i have no idea how to make them smaller on my phone - i will edit this tonight to make them smaller!

Practicing seaming:
http://uploads.tapatalk-cdn.com/20160420/c97811d9e858e00295908fefbe90551b.jpg

http://uploads.tapatalk-cdn.com/20160420/85e40f1c511d6b343aa689b13bb6a8ef.jpg
i just need to stick it together with silicone but i think it looks pretty good if i do dlsay so myself haha

Sent from my HUAWEI Y360-U03 using Tapatalk

[Mermaid Keena]

http://uploads.tapatalk-cdn.com/20160420/5a2971ceaeaef7402cde7f26c719805e.jpg

Sent from my HUAWEI Y360-U03 using Tapatalk

[The Water Phoenix]

Very pretty! :)

[HamptonsMermaid]

Seem looks good, but I can't help but think it's going to be much trickier to get everything lined up when it comes down to it. Been wondering how it's going to work out when I get to that point for my tail. Haven't actually seen much advice, pics or posts about seaming in specific, so if anyone has tips speak up!

[Mermaid Keena]

Ive made my scale sheet so it has a lot of extra on each side so ill be pinning one side on my body mold then laying the other side on and pinning to match. Then i'll cut it out a bit at a time to match it up. Well thats what is in my head haha i guess i wont really know until i try :D

Sent from my HUAWEI Y360-U03 using Tapatalk

[AnnaAbyss]

Did seaming the test pieces work?

[Mermaid Keena]

I ran out of testing silicone lol but im sure it'll work! *thinking positive* i think i may not be doing the side fins now. We shall see - i might add them at the end :)

posted via phone

[Mermaid Lieke]

your test look great! I'm also working on a tail. it is such fun!

[Mermaid Keena]

your test look great! I'm also working on a tail. it is such fun!

Thank you! I agree - its a lot of fun! BUT totally time consuming hahahaha

[The Water Phoenix]

Gosh, the gradients are so pretty! The white will look stunning down the centre o the tail! Perth weather, warm up now [emoji1303]❤️


Sent from my iPhone using Tapatalk

[Mermaid Keena]

Haha perth weather stop being so confusing!! haha im more waiting on funds atm ugh bring on tax time lol

posted via phone

[Mermaid Keena]

http://uploads.tapatalk-cdn.com/20160524/816be51a06760e84c4689fb51ef90142.jpg

Not sure if I've got everything on the list that I will need haha
Also not sure how much silicone i should get - so if you have any ideas haha id really appreciate it!

posted via phone

[AnnaAbyss]

Just buy the 5kg packs when you need to or buy a few at a time. That's what I do. 22kgs is WAY too much. xD

[Mermaid Keena]

Haha i think thats what i will do :D

Sent from my SM-G900I using Tapatalk

[Mermaid Keena]

http://uploads.tapatalk-cdn.com/20160714/485912d3826c0bc444064f339b70533c.jpg

This happened tonight! Its a bit on the thin side, but now i can add to it [emoji179] [emoji179]

Sent from my SM-G900I using Tapatalk

[Mermaid Keena]

BTW no one warned me about blisters!!! ouchies! 😢😢

Sent from my SM-G900I using Tapatalk

[Lili]

Is that polymer clay?? Hey no worries, blisters will be gone, I'm getting a million of them from cutting out my plastic scales, I also had to cut my polycarbonate sheet with scissors and a scraping tool...now THAT was a nightmare

[Ashe]

Very cool fluke shape :) Good luck!

Whenever I'm going project that tend to result in blisters, I always to to take a break every few minutes to stretch my hands and massage my fingers. It helps to make the skin a bit more flexible and prevent blisters :D

[Mermaid Caspiana]

You're going along great! :) I can't wait to see you finish! <3

[Ashton]

you dont have to use fiberglass if you dont want to, I only used it because I am well versed in it, and it is easy to get. You can use 2 part molding material from Smooth On I dont recall what it is called off the top of my head. But IF you do use fiberglass BE AWARE IT SMELLS (like ppl around you will smell it also, its that bad) and do it outside!
As for fiberglass matting, you dont need much, like 2 layers- maybe 3.
AND WEAR GLOVES WHEN YOU ARE DOING IT!!

[Mermaid Keena]

Awwe thanks all! Its called modelling clay I couldnt find ingredients so fingers crossed its fine!

I've decided against fibreglass as i can not get it right with ALL my practice.. 100% over it!
Im planning on plaster of paris (thick) with a wire backing for extra strength. Fingers crossed i get no cracking!

Half way through ridges. Having a break now. Im not sure how thick the bits between ridges are supposed to be but heres hoping i eventually make it thick enough. Its pretty thin right now.

http://uploads.tapatalk-cdn.com/20160715/ba1eb7817a9b0214af1ff0777379d94b.jpg

Sent from my SM-G900I using Tapatalk

[Mermaid Keena]

http://uploads.tapatalk-cdn.com/20160715/72618856d03a77a7c49ef2c6222db7e4.jpg

Done, just need to smooth out a bit and add some "bumps" which will be rolled up bits of clay 😁

Sent from my SM-G900I using Tapatalk

[Mermaid Keena]

Oh and add the foam scales at the top

Sent from my SM-G900I using Tapatalk

[Lili]

That right there just looks awesome on its own, the shape and colors :O you're doing a great job, just be cautious with plaster, I broke my entire mold the first time around

Sent from my SAMSUNG-SM-G900A using Tapatalk

[Mermaid Keena]

Haha i love all the colours too 😃 thanks! Fingers crossed i can do it strong enough 😁

Sent from my SM-G900I using Tapatalk

[Lili]

Oh yeah heh, I had to get help to flip my mold haha I'm a weakling, I can't wait to see what you create

[MerQueen Nerissa]

Your fluke sculpt looks awesome!!
As long as you're super careful with the plaster, it should be fine! My fluke is MASSIVE and I used plaster for my mold, and made it waaayyy too thin, but I managed not to break it!!

[Lili]

Wow merqueen nerissa, kudos to you, that takes skill haha

Sent from my SAMSUNG-SM-G900A using Tapatalk

[Mermaid Keena]

Thanks!! I cant wait! Did you do a scale sheet too?

Sent from my SM-G900I using Tapatalk

[Mermaid Keena]

http://uploads.tapatalk-cdn.com/20160716/deb4823ff715698e5964a682f59a7fe2.jpg

Scales added.

http://uploads.tapatalk-cdn.com/20160716/d1c2aa1a1383b829f1d78b2fbd3d0703.jpg

Need to buy a smidge more plaster to make it decent thickness.

Sent from my SM-G900I using Tapatalk

[MerQueen Nerissa]

Thanks!! I cant wait! Did you do a scale sheet too?

Sent from my SM-G900I using Tapatalk

Not with this tail but I have made a scale sheet with plaster. I'd advise to use something like cardboard for the walls so you can easily tear it away and have more than one person to flip it over. It's definitely doable but you'll have to be rreeeaalllyy careful! :)

Sent from my SCH-I545 using Tapatalk 2

[Mermaid Keena]

Thanks! Im sure hubby would help me flip it haha

Sent from my SM-G900I using Tapatalk

[AnnaAbyss]

Woooo! Great looking sculpt!!! Can't wait to see the finished mold.

[Sammi the Sleepy Mermaid]

Looking great!!! Super excited! :D

[Mermaid Keena]

Got more plaster today... finally! Also is this the stuff that you can clean the silicone with before doing the slime coat? http://uploads.tapatalk-cdn.com/20160726/c065a6c39fc8fc68998e64b8aca6574b.jpg
The name sounds familiar 😃

Sent from my SM-G900I using Tapatalk

[AelianaNympha]

Got more plaster today... finally! Also is this the stuff that you can clean the silicone with before doing the slime coat? http://uploads.tapatalk-cdn.com/20160726/c065a6c39fc8fc68998e64b8aca6574b.jpg
The name sounds familiar [emoji2]

Sent from my SM-G900I using Tapatalk

You can find some for way cheaper than that! Go to the first aid section of your grocery store and pick up the highest percentage of rubbing alcohol they've got. I grabbed a huge bottle of 91% at Walmart for like 5 bucks. :) I just use a paper towel to clean the silicone and it works like a dream!


Sent from my iPhone using Tapatalk

[Mermaid Keena]

Technically it'd only be $6.70USD or something haha but i only took a pic because i recognised the name hahaha! Nowhere near that part yet 😂

Sent from my SM-G900I using Tapatalk

[Sammi the Sleepy Mermaid]

Lol, someone really made their own brand of alcohol? :lol:I would definitely just go to a general store and get it out of the first aid section. 91% is the strongest you can get generally over the counter, online you can get 99.9%. I use it all the time. If you don't know the difference, basically it's just less water in it. I have to use it for my job so the less water the better. But, for this, 91% would be just fine.

[Mermaid Keena]

This was in a hardware store! 😂no problem i'm sure I'll find the right stuff hahaha

Sent from my SM-G900I using Tapatalk

[AnnaAbyss]

Chemists sell isopropyl alcohol in bigger bottles. And yep it cleans silicone!

[Mermaid Keena]

Awesome thanks Anna! 😙

Sent from my SM-G900I using Tapatalk

[The Water Phoenix]

The fluke sculpt looks beautiful! Perth weather, warm up so I can go for a swim! :)

[Mermaid Keena]

Haha thanks! I agree i wish i could migrate north but i have children at school haha *le sigh*

Sent from my SM-G900I using Tapatalk

[Mermaid Keena]

http://uploads.tapatalk-cdn.com/20160820/c674ba9d61e92000bc3e8573d9411cac.jpg

Plaster is finally a decent thickness 😂 but the wire is a pain in the butt - also its damn sharp! Be careful!!! 😂

Im going to get another mdf board to flip it onto to try and keep it safe so fingers crossed!!

Sent from my SM-G900I using Tapatalk

[Rett]

Looks great so far! Love the fluke! It's actually fairly similar to one I designed. I can't wait to see it finished! :D

[Mermaid Keena]

Thanks Rett 😊 i just wanted to keep it a bit easier for my first fluke (first go at mold making also) so i believe the design is pretty common hahaha.

I hope it turns out awesome. Im very tempted to buy another bag of plaster but im also super keen to flip it over! 😂😂😂😂



Sent from my SM-G900I using Tapatalk

[Mermaid Keena]

So i turned my fluke mold by myself.... dont do it 😢😢😢 soooo many cracks 😭😭😭

http://uploads.tapatalk-cdn.com/20160901/c05de0f980daec7df9145e4d51762f30.jpg
http://uploads.tapatalk-cdn.com/20160901/7670f5a6e104aaa79db6986bbc9dad1d.jpg
http://uploads.tapatalk-cdn.com/20160901/82ab7a29c5c99e35c99ec8204cb7f041.jpg

but, im sure I can "sort of fix it" hopefully!!!

Sent from my SM-G900I using Tapatalk

[Mermaid Keena]

http://uploads.tapatalk-cdn.com/20160919/5bb06b6d7031425bfc1ccf52484a3d1e.jpg

Ordered my gelcoat for my scale sheet 😊 so excited!!! Aiming to get my tail done by November at the latest!!

Sent from my SM-G900I using Tapatalk

[The Water Phoenix]

Your fluke mould looks good! [emoji1303] I want to re make my scale sheet because it cracked and I want to make it out of a lighter material. If only Perth's weather would warm up! ❤️


Sent from my iPhone using Tapatalk

[Mermaid Keena]

Its sooooo cracked haha but thanks!

Omg i know right!! Its not winter anymore, bring on the warmth!!!

Sent from my SM-G900I using Tapatalk

[AnnaAbyss]

Aw Keena, so sorry to hear your fluke mold broke D: But heck yeah for warm Aussie weather!!!!

[Mermaid Keena]

Its no problem... .. actually its driving me crazy haha but i dont want to start it again 😂😂 im thinking maybe that bog stuff i bought!!

Sent from my SM-G900I using Tapatalk

[Mermaid Keena]

I decided to start again. My 3yrold walked on it and its not salvageable 😢

http://uploads.tapatalk-cdn.com/20160925/ed3b560b2212e93d2b1d4fef75637098.jpg
My (nearly) 6yrold had waaay too much fun helping me break it up to fit in the bin!

Sent from my SM-G900I using Tapatalk

[Mermaid Keena]

http://uploads.tapatalk-cdn.com/20160925/bcb7f0b1194856f1b1017368df27804a.jpg

New inspiration ^^^ one of my Barbies is a mermaid haha and I figured it was totally different to my original design 😂 😂
http://uploads.tapatalk-cdn.com/20160925/606e1338cb3b292f8b05129616e7af5c.jpg

Sent from my SM-G900I using Tapatalk

[MerEmma]

Ooooh, what a magical fluke design!

[Mermaid Keena]

Aww thanks MerEmma 😊 The credit has to go to Mattel & Barbie 😂

Sent from my SM-G900I using Tapatalk

[Mermaid Clara]

http://uploads.tapatalk-cdn.com/20160925/bcb7f0b1194856f1b1017368df27804a.jpg

New inspiration ^^^ one of my Barbies is a mermaid haha and I figured it was totally different to my original design [emoji23] [emoji23]
http://uploads.tapatalk-cdn.com/20160925/606e1338cb3b292f8b05129616e7af5c.jpg

Sent from my SM-G900I using Tapatalk

Oh my goodness! This is adorable and beautiful! Will you be taking commissions for tails once you finish yours? I'm totally in love with this fluke!!!!!!!!!


Sent from my iPhone using Tapatalk

[Mermaid Keena]

Hahahahaha 😂😂😂😂😂😂 no i will not be 😂 waaay too $$$$ and time consuming 😁

Sent from my SM-G900I using Tapatalk

[Mermaid Keena]

Especially because Im in western australia and have to ship silicone from the eastern states 😊 if I did make tails for others they would have to be local or the shipping prices would make them super expensive 😊

Sent from my SM-G900I using Tapatalk

[PearlieMae]

Have you looked into a product called PinkySil? It's supposed to be the same as Dragonskin but it's manufactured in Australia.

I'll see if I can find more info!

[Mermaid Keena]

Im using vario15 😊 thanks though pearlie 😊 pinkysil i only found it in small packets for crazy prices haha

Sent from my SM-G900I using Tapatalk

[Mermaid Keena]

http://uploads.tapatalk-cdn.com/20160929/7878b831d23ac5a91026b511f196e902.jpg

My scale sheet bowed so im "trying" to flatten it haha. 2x christmas trees, toddlers bed end and weights hahaha!

http://uploads.tapatalk-cdn.com/20160929/6604307c086404c952a5562329360ca0.jpg

I drew the outside of my fluke. This is what i will fill with clay (buying new stuff because the old has plaster through it) then Ill use the template to press the ridges onto the clay.

[emoji13] [emoji7]

Sent from my SM-G900I using Tapatalk

[LouLouBelle]

I love that fluke shape - looking forward to seeing this progress!


Sent from my iPhone using Tapatalk

[Mermaid Keena]

Haha me too LouLouBelle! Im actually seeing the bright side of the plaster not working haha 😊

Sent from my SM-G900I using Tapatalk

[ForsakenMermaid]

http://uploads.tapatalk-cdn.com/20160925/bcb7f0b1194856f1b1017368df27804a.jpg

New inspiration ^^^ one of my Barbies is a mermaid haha and I figured it was totally different to my original design  
http://uploads.tapatalk-cdn.com/20160925/606e1338cb3b292f8b05129616e7af5c.jpg

Sent from my SM-G900I using Tapatalk

I really love this one! It looks like it's made for a mermaid princess!

[Mermaid Keena]

http://uploads.tapatalk-cdn.com/20160930/5cee709c36e3f4e4658e849afa3be547.jpg

Progress 😊

Omg i know I love it so much! Im going to feel sooooooo girly! Hahaha [emoji7] [emoji7] [emoji7]

Sent from my SM-G900I using Tapatalk

[Hydra1337]

Looking good. I love the fluke.

[Mermaid Keena]

http://uploads.tapatalk-cdn.com/20161012/230df76e518b8e4b4509f20f3b006f5d.jpg

Eeee!!! Almost ready for my gelcoat!!! Just waiting for Mr 3 to go to sleep!!! 😊


Sent from my SM-G900I using Tapatalk

[Mermaid Keena]

http://uploads.tapatalk-cdn.com/20161012/19ec2563ab680958399d16e60d4d8c7b.jpg

Extremely thin layer of gelcoat... will be doing more as i bought A LOT haha also its a bit patchy and started curing really quickly because its a beautiful 32°C today here in Perth!
BTW gelcoat gets hot!!! My container was really hot with the leftover hard bits of gelcoat 😂 😂 😂

Im aiming for a smooth even layer of gelcoat then i will be backing it with fibreglass for a bit more strength. 😊

http://uploads.tapatalk-cdn.com/20161012/d9883714bb7be34f52a1125d7aff12f8.jpg

Sent from my SM-G900I using Tapatalk

[Ashton]

be careful, fiberglass can melt and deform craft foam.... I know from experience.
Gel coat should help you protect from that, but make sure you follow the directions of the gel coat mixing bottle!

[Mermaid Keena]

I added waaay too much catalyst 😂 so im hoping it doesnt affect the final result!!

I used fibreglass by itself last time and it wasnt great but i am hoping the gelcoat will make it a smoother mold.

Sent from my SM-G900I using Tapatalk

[Mermaid Keena]

two layers of gelcoat are done :thumbs up:
Fibreglass done :thumbsup: Now I'm just waiting for it to cure :D

Ordered my 22kg of Silicone! Also my pigments are on the way!!

TO DO:

* check the fibreglass/gelcoat scale sheet - fingers crossed it worked!
* use the modeling clay to cover all the gaps in the fluke mold and add the swirls. Add the scales to the fluke mold.
* Do a few gelcoat layers on the fluke mold - then fibreglass. *HOPEFULLY* if the scale sheet works!!
* Wait a week after the molding for the fibreglass to de-gass!
* Test the spray painted mold with silicone then decide if i will be spray painting the scale sheet and the fluke mold.
* Make a body mold to make seaming easier =)
* Pour actual Scales and Fluke! + Put it together!!
* Testing swim!
* Mercon in Busselton!!!

[WaterDragon]

Yay progress!

[Mermaid Keena]

http://uploads.tapatalk-cdn.com/20161016/112cae526099f81a4c5e5aa2619cc4ec.jpg

It worked!!!! [emoji106] [emoji106] [emoji106] [emoji126] [emoji126] [emoji126]

http://uploads.tapatalk-cdn.com/20161016/1f35c0ca151a98fdafbeb8d8628be5d3.jpg

Sent from my SM-G900I using Tapatalk

[Lili]

Hooray!! That's so exciting

Sent from my SAMSUNG-SM-G900A using Tapatalk

[Mermaid Keena]

Haha thanks Lili!!! I danced a little bit in excitement hahaha

Sent from my SM-G900I using Tapatalk

[Mermaid Keena]

http://uploads.tapatalk-cdn.com/20161018/f9d80ed71db5a46ca80175e28dceeff9.jpg

Eeee!!! My mica arrived 😁😁😁😁 sooooooo pretty!!! If you are in the market for micas please check out glitterfingers on ebay! (I'll find the link) They get sent in little zip lock bags so you dont need to pay shipping! I bought these cute little containers for $1 each at the reject shop 😍😍😍 so cute!

I ordered my silicone but it is now on back order! Hahaha so fingers crossed they have good news for me by end of the week!!

Fluke WILL BE finished tonight... so i can gel coat in the morning/during the day!

On other news... my treadmill is arriving tomorrow!!! I am super excited to be able to run without people seeing 😂😂😂

Sent from my SM-G900I using Tapatalk

[The Water Phoenix]

Sooooo pretty! :)

[Ilyena]

Glitterfingersnails (http://www.ebay.com.au/usr/glitterfingersnails?_trksid=p2047675.l2559) <----These guys??

[Mermaid Keena]

Thats the one! 😀 thanks!!

Sent from my SM-G900I using Tapatalk

[Ilyena]

I'm looking at getting pigments too, so on a hunt I went!! though I'm a little concerned with red as they can have sulfur in them.

[Mermaid Keena]

I bought the smaller amounts for my testers ☺ all the ones i tried were great. (But i didnt try a pure red) i 100% recommend lots of testers ☺ i used a whole trial kit on tests only haha

Sent from my SM-G900I using Tapatalk

[WaterDragon]

Back order is the worst, hopefully they can ship your silicone soon.

[Ilyena]

I bought the smaller amounts for my testers ☺ all the ones i tried were great. (But i didnt try a pure red) i 100% recommend lots of testers ☺ i used a whole trial kit on tests only haha

Sent from my SM-G900I using Tapatalk

Is it sad I may have 15 3g testers on their way to me?? I just can't tell if the colour is right unless I see it in person.

[Mermaid Keena]

Is it sad I may have 15 3g testers on their way to me?? I just can't tell if the colour is right unless I see it in person.
Haha i had heaps also!! 😂

Sent from my SM-G900I using Tapatalk

[Mermaid Keena]

http://uploads.tapatalk-cdn.com/20161019/47f955861f5a7eeafb7578e6065a4748.jpg
Nearly finished! Just need to do more scales at the top 😁 (under the books haha)

Sent from my SM-G900I using Tapatalk

[Hydra1337]

Looking good, merl! I seriously love that fluke. :)

[Mermaid Keena]

Haha i love it so much too!!! Cannot wait for the molding process to finish and silicone to arrive!!! 😁😁😁😁😁

Sent from my SM-G900I using Tapatalk

[Mermaid Keena]

http://uploads.tapatalk-cdn.com/20161021/a51636c6dbe0aaba0e5fd4303783ac88.jpg

Fluke done 😍😍😍😍

Sent from my SM-G900I using Tapatalk

[The Water Phoenix]

In love!!! <3 <3 <3

[Mermaid Keena]

Me too! I cant wait to get the molding out of the way 😂

http://uploads.tapatalk-cdn.com/20161022/390232d6bc0e9acf407947948bc15b77.jpg

Gorgeous weather here in Rockingham today! Had to take my "baby tail" out for a swim 😊

Sent from my SM-G900I using Tapatalk

[Mermaid Keena]

http://uploads.tapatalk-cdn.com/20161025/3321b0e8be0544ddb91bee0304a96ec2.jpg

😣😣😣

So we are camping until the 18th Nov. Hopefully it arrives before then. Ive leave for Mercon in Busselton on the 24th!!! I hope that is enough time to pour the silicone AND put it together AND take for a test swim 😂😂😂

Sent from my SM-G900I using Tapatalk

[Mermaid Keena]

Eeeee!!!! Got a call this morning and the silicone is ready to ship to me!!!! Woohoo!!! Back on track!!!

Just finished fibreglassing my fluke!
http://uploads.tapatalk-cdn.com/20161026/18eef8bb1e016f4db20a4e60557fba7c.jpg

Sooo a week from today (to let my fibreglass degass) i can get started because silicone SHOULD be here! I MIGHT even get it done before we go camping!! 😲😲😲😲😲🎊🎉🎊🎉

Sent from my SM-G900I using Tapatalk

[Mermaid Keena]

http://uploads.tapatalk-cdn.com/20161026/316bd072ea468c04d36ec1bdba8b6b2e.jpg

http://uploads.tapatalk-cdn.com/20161026/68fd89a1de2ba83318e7e4f4aa4ff827.jpg

Just needs a scrub!!

Sent from my SM-G900I using Tapatalk

[Marinus Mortimer]

:cheerleader::yay::dance: awesome!

[Mermaid Keena]

Colour ideas 😊 Yes they are all pretty similar haha!

A.
http://uploads.tapatalk-cdn.com/20161026/8ed001e8881904bd8f12061d6e1b2e2c.jpg

B.
http://uploads.tapatalk-cdn.com/20161026/3c96fac982b7cfe393d6cd83dec380a5.jpg

C.
http://uploads.tapatalk-cdn.com/20161026/4808b253f9c85d815c433993634f397e.jpg

D.
http://uploads.tapatalk-cdn.com/20161026/35708a4726f51f4875f9e4b669fc55f5.jpg

Sent from my SM-G900I using Tapatalk

[Hydra1337]

D is my favorite.

[Mermaid Keena]

Im thinking A or D because the scales that attach are purple its just the circles that are different haha

Sent from my SM-G900I using Tapatalk

[Meemerdd]

They're so pretty! Gotta say B. And C. Are my favorites.

[MerChemi]

I think I might be leaning towards A the most. But wow! what a gorgeous fluke shape, it's so unique!

[Mermaid Keena]

http://uploads.tapatalk-cdn.com/20161101/564c083453a5d765360c645ccff23b96.jpg

*EEEEEEEK!!!* it is HERE!!! All 22kg of it!! 😂😂😂 now to hurry up and get my molds cleaned and foam/clay free!!! Any ideas!?

Sent from my SM-G900I using Tapatalk

[MermaidLiara]

Awesome! May I ask how much it cost?

Really curious to see the end result.

[Mermaid Keena]

From queensland to western australia the total price was $880 i think 😊

Sent from my SM-G900I using Tapatalk

[MermaidLiara]

total price was $880 i think 😊

OK, that's not so bad :)

May I ask your estimate for the total costs of your self made silicone tail?

[Elle]

I'm using the same type of silicone, I didn't buy the 22kg drum and so far I've spent $588.50 AUD on silicone (however I'm casting thin). Adding into that pigments, tools, moulding media, etc has probably been around another $150 - $200. And then my monofin cost $160 something.
So all up building a silicone tail in Australia starts around the $1000 mark.

[Mermaid Keena]

Hahahaha oh boy.... lets just say above $3000!!! 😂

Sent from my SM-G900I using Tapatalk

[Mermaid Keena]

Ive made a fir few mistakes lol

Sent from my SM-G900I using Tapatalk

[Elle]

Ive made a fir few mistakes lol

Sent from my SM-G900I using Tapatalk


It happens. I've made lots of mistakes that could've been much more costly then they ended up being. I got very lucky

[Mermaid Keena]

Im just happy its under 5000 😂 because if it goes over then i shouldve just paid someone hahaha!!

Luckily my mistakes were with testers and the only big set back was my first fluke mold. I had to throw out the clay etc because it got filled with bits of plaster 😐 now i just need to plug up the holes on my molds and clean them even more! Stupid foam circles got pretty stuck on my scale sheet haha!

Sent from my SM-G900I using Tapatalk

[Elle]

Yep, I had the same issue. And I coated the foam twice! Once in PVA glue and then with wax for demolding.

[Mermaid Keena]

Omg pva glue was a pain in the butt!!! 😂 i THINK i got it all off hahahaha

Sent from my SM-G900I using Tapatalk

[Mermaid Océane]

It's a so great work! I hope you'll have a nice tail! :D (I love the shape of the fluke)
It made me want to make one, but no money... --'

Good luck to finish it! ;)

[Mermaid Keena]

Thanks!! 😊

http://uploads.tapatalk-cdn.com/20161102/d99d7ae8f1cff11b48d661a51313805c.jpg

Got some netting instead of fancy power mesh haha (price was a BIG factor! Powermesh stuff was $20per metre compared to this netting at $3.99per metre!)

http://uploads.tapatalk-cdn.com/20161102/fa8d4fde5e44a58fa003b992f36c7ec9.jpg

Ive finished scrubbing... i cannot get any more off! I also took off all the overhanging bits so it should have no issues coming out. Ive also patched up all the teeny gaps on my fluke with builders bog 😊 (pink stuff) yeah its on the back of the mold 😁

Sent from my SM-G900I using Tapatalk

[Mermaid Tami]

Thanks!! [emoji4]

http://uploads.tapatalk-cdn.com/20161102/d99d7ae8f1cff11b48d661a51313805c.jpg

Got some netting instead of fancy power mesh haha (price was a BIG factor! Powermesh stuff was $20per metre compared to this netting at $3.99per metre!)

http://uploads.tapatalk-cdn.com/20161102/fa8d4fde5e44a58fa003b992f36c7ec9.jpg

Ive finished scrubbing... i cannot get any more off! I also took off all the overhanging bits so it should have no issues coming out. Ive also patched up all the teeny gaps on my fluke with builders bog [emoji4] (pink stuff) yeah its on the back of the mold [emoji16]

Sent from my SM-G900I using Tapatalk

This has been very helpful! I've had a few issues with the mold for my top!


Sent from my iPhone using Tapatalk

[Mermaid Keena]

Im glad its been helpful 😊 I hope you have gotten through your molding issues 😀

Sent from my SM-G900I using Tapatalk

[Mermaid Tami]

Im glad its been helpful [emoji4] I hope you have gotten through your molding issues [emoji3]

Sent from my SM-G900I using Tapatalk

I did! I poured the silicone this evening. I'm so afraid it's not going to turn out!


Sent from my iPhone using Tapatalk

[Mermaid Keena]

I have fins crossed for you!!! 😊

Sent from my SM-G900I using Tapatalk

[Mermaid Keena]

First layer done.... at least 1-2 more to go on this one side lol

http://uploads.tapatalk-cdn.com/20161103/ff75c914301a0cbee548eb189cfbc7e4.jpg

Sent from my SM-G900I using Tapatalk

[Mermaid Keena]

http://uploads.tapatalk-cdn.com/20161104/fb584e6e87c767e3da56aac39ff09e62.jpg

Gorgeous weather for curing silicone today!! 😍😍😍

Second layer on fluke done!
http://uploads.tapatalk-cdn.com/20161104/ea918555a9be9ebaa0d84a9f76b4f78d.jpg

First layer of scales done!
http://uploads.tapatalk-cdn.com/20161104/a46ef5b81ec916efcbcfc427040a56e5.jpg

Sent from my SM-G900I using Tapatalk

[Mermaid Keena]

Waaaah it's still so seethrough [emoji29] [emoji29] [emoji29] [emoji29]

http://uploads.tapatalk-cdn.com/20161104/da03fc2f7fafd20ddf44b27f4f22e2f3.jpg

No idea what to do lol the netting wont cover the monofin colour. So maybe neoprene? But will silicone stick to neoprene!?

Or do i just do LOTS of pigment next time?


Sent from my SM-G900I using Tapatalk

[Mermaid Lieke]

You can ad pigmented silicone to you netting before adhering the fluke. That did it for me

Verstuurd vanaf mijn ALE-L21 met Tapatalk

[Mermaid Lieke]

PS, I have pictures on in the thread of my tail from the proces

Verstuurd vanaf mijn ALE-L21 met Tapatalk

[Mermaid Lieke]

Link: http://mernetwork.com/index/showthread.php?t=13119

Verstuurd vanaf mijn ALE-L21 met Tapatalk

[Hydra1337]

If you get neoprene make sure it's faced with fabric on both sides. I believe Moodfabrics.com has neoprene faced with purple fabric on one side.

[Mermaid Keena]

Ive got pink neoprene (pink on one side black on other) but im going to try making it thicker and using the pink netting - even if i have to double layer it :)

Sent from my SM-G900I using Tapatalk

[Mermaid Clara]

You can try adding a layer of matte white pigmented silicone to the inside


Sent from my iPhone using Tapatalk

[Mermaid Keena]

http://uploads.tapatalk-cdn.com/20161114/6b1b7974b15518e2c06b5552189e9250.jpg

Im going to use my fin fun skin as my scales. And only do my fluke as silicone (for now). I plan on hand sewing my scales over the top of the silicone with fishing line.

Going to do a small amount of purple where fluke and scales connect and blend to pink then pinky white. I will also cover the fluke with iridescent purple to up the shiny. I have neoprene covering the monofin which has helped. I have left drainage in the neoprene and i will be using a few straws in that area to leave drainage with the silicone.

Fingers crossed it goes to plan this time haha [emoji23] [emoji23] [emoji23] [emoji23]

Sent from my SM-G900I using Tapatalk

[Mermaid Keena]

http://uploads.tapatalk-cdn.com/20161117/4657234817e45fd50066b321e576fa69.jpg

Soooo still a lot purple (because im running out of pink mica 😂)
But at the moment if it turns out how i hope i will be happy. I'll be doing a black layer all over to thicken it up and make it waaaay less see through 😊 one week today and ill already be in busso for mercon!

Sent from my SM-G900I using Tapatalk

[Mermaid Keena]

Back Fluke pulled 😊

http://uploads.tapatalk-cdn.com/20161122/08ee3b5601bb00164fb93457f30450bd.jpg

Belly fluke - before black layer
http://uploads.tapatalk-cdn.com/20161122/71cfe274016ed49519d702d549116de2.jpg

Mermaid hair.... all ready for Mercon in Busselton this weekend!!!

http://uploads.tapatalk-cdn.com/20161122/d39f1bf1e70b362c0f52e33655cd4ae9.jpg

Sent from my SM-G900I using Tapatalk

[WaterDragon]

The belly fluke colors are looking nice and vibrant =D

[Mermaid Keena]

They are ☺ but im putting a layer of black/grey on the inside... to stop the seethroughness ☺ so it may change it. Also its getting a "slime coat" of iridescent purple glitter so hopefully it'll brighten up a bit more 😊

Sent from my SM-G900I using Tapatalk

[WaterDragon]

That sounds like it will be beautiful! I cant wait to see more pictures!

[Dame Melusine]

Mermaid Keena,
I love love love your colors and sculpt! May I just suggest you integrate some powermesh to your silicone fluke where you will be sewing it to fabric. I would be afraid the stitches would eventually cut right through the silicone. You can integrate the powermesh by painting a thin layer of silicone as the glue, adding the mesh and let it dry, then another thin layer of silicone. I am using this technique for strenghtening peel-away aquarium silicone fins.

[Mermaid Mia]

Those colors are looking fabulous


Sent from my iPhone using Tapatalk

[Mermaid Keena]

I was going to do that Dame Melusine but i coated the neoprene in silicone to stick it to the fluke. The only thing im sewing (hopefully) is the scales over the fluke. (Scales are bathing suit material)

Its all squashed together.... heres hoping it works!!!! Tomorrow we leave for mercon!

http://uploads.tapatalk-cdn.com/20161123/61bf58e96a531e85a0c6f601f09bfaa3.jpg

Sent from my SM-G900I using Tapatalk

[Mermaid Keena]

Thanks everyone for your support while doing this! 😙😙😙😙😙

Sent from my SM-G900I using Tapatalk

[Mermaid Keena]

http://uploads.tapatalk-cdn.com/20161123/6469af2d0663106b09569c6e7fc75948.jpg

Eeee!!! Its sticking!!! Just tidied up the edges 😍😍 sooooo heavy!!!!

Sent from my SM-G900I using Tapatalk

[Mermaid Keena]

Btw theres still one straw in it lol and of course it is green and stands out lol but oh well!

Sent from my SM-G900I using Tapatalk

[Mermaid Keena]

http://uploads.tapatalk-cdn.com/20161123/a35cb315ac69878bcf87b197d51edd60.jpg

All done 😊 test swim on friday! 😊

Sent from my SM-G900I using Tapatalk

[Mermaid Lieke]

Cool! It looks really nice!

Verstuurd vanaf mijn ALE-L21 met Tapatalk

[Mermaid Keena]

Thanks 😊😊😊

Sent from my SM-G900I using Tapatalk

[Mermaid Keena]

Pretty buoyant but im thinking thats from the neoprene. Also it fills with water so lifting the fluke out of water takes BULK effort until the water drains. 😂 so cool though@!!

Sent from my SM-G900I using Tapatalk

[Mermaid Keena]

http://uploads.tapatalk-cdn.com/20161130/ae2162c2849713700eab9393fe195fb4.jpg

http://uploads.tapatalk-cdn.com/20161130/b44d2e9b4bac600bc1ea2148b07dee80.jpg

http://uploads.tapatalk-cdn.com/20161130/d4f361d6f4b8f486b691a23ac3d5c306.jpg

Sent from my SM-G900I using Tapatalk

[The Water Phoenix]

Beautiful! :)

[WaterDragon]

It looks so good in the water! Congratulations!

[Mermaid Keena]

Thanks 😁 ive decided to do individual scales over scuba knit eventually haha but no rush (maybe by mercon next year haha)

Sent from my SM-G900I using Tapatalk

[xaccer2]

разд (http://audiobookkeeper.ru/book/1569)

[xaccer2]

258.8 (http://cottagenet.ru/plan/357)

[xaccer2]

Haus (http://eyesvision.ru/lectures/172)

[xaccer2]

CHAP (http://eyesvisions.com/strengtheningeyes/11)

[xaccer2]

Зори (http://factoringfee.ru)

[xaccer2]

Bill (http://filmzones.ru)

[xaccer2]

feat (http://gadwall.ru)

[xaccer2]

Jorg (http://gaffertape.ru)

[xaccer2]

Перв (http://gageboard.ru)

[xaccer2]

Фаде (http://gagrule.ru)

[xaccer2]

Marc (http://gallduct.ru)

[xaccer2]

Juic (http://galvanometric.ru)

[xaccer2]

M204 (http://gangforeman.ru)

[xaccer2]

Elvi (http://gangwayplatform.ru)

[xaccer2]

Fisk (http://garbagechute.ru)

[xaccer2]

Over (http://gardeningleave.ru)

[xaccer2]

�зык (http://gascautery.ru)

[xaccer2]

Cant (http://gashbucket.ru)

[xaccer2]

Mari (http://gasreturn.ru)

[xaccer2]

(И�п (http://gatedsweep.ru)

[xaccer2]

Керт (http://gaugemodel.ru)

[xaccer2]

Соде (http://gaussianfilter.ru)

[xaccer2]

Кнор (http://gearpitchdiameter.ru)

[xaccer2]

Лоба (http://geartreating.ru)

[xaccer2]

Punk (http://generalizedanalysis.ru)

[xaccer2]

UEFA (http://generalprovisions.ru)

[xaccer2]

Sand (http://geophysicalprobe.ru)

[xaccer2]

�ерт (http://geriatricnurse.ru)

[xaccer2]

Jewe (http://getintoaflap.ru)

[xaccer2]

Nail (http://getthebounce.ru)

[xaccer2]

Форм (http://habeascorpus.ru)

[xaccer2]

Agat (http://habituate.ru)

[xaccer2]

Ð*езн (http://hackedbolt.ru)

[xaccer2]

Кайд (http://hackworker.ru)

[xaccer2]

Прав (http://hadronicannihilation.ru)

[xaccer2]

Ð*езн (http://haemagglutinin.ru)

[xaccer2]

Tsub (http://hailsquall.ru)

[xaccer2]

Brun (http://hairysphere.ru)

[xaccer2]

(�лм (http://halforderfringe.ru)

[xaccer2]

У�ть (http://halfsiblings.ru)

[xaccer2]

Кали (http://hallofresidence.ru)

[xaccer2]

И�тр (http://haltstate.ru)

[xaccer2]

Dian (http://handcoding.ru)

[xaccer2]

Мо�к (http://handportedhead.ru)

[xaccer2]

DrBr (http://handradar.ru)

[xaccer2]

Frot (http://handsfreetelephone.ru)

[xaccer2]

Body (http://hangonpart.ru)

[xaccer2]

Neer (http://haphazardwinding.ru)