My individual scale tail attempt

[MermaidIndie]

Be warned this post is image heavy

So I've been in love with individual scale tails since PearlieMae made one for the first time and have since been following every thread I can find. I can finally start my tail so I decided to start a thread of my own to help keep me going and to hopefully help others :)

So the first thing I did was sketch out an idea. I had a sketch of a fluke from another tail I wanted to make a couple years ago in mind and used it as inspiration to make this

http://uploads.tapatalk-cdn.com/20160712/697190c756229f3d483c374b0f5e1b90.jpg

Then I headed to Joanns to pick up some *power mesh, which was $12.99 a yard but I had a 40% off coupon and only paid $9.33, and basically made a fabric tail out of that for my base!

http://uploads.tapatalk-cdn.com/20160712/39e9ec59720add17e64a60fe4712f246.jpg

http://uploads.tapatalk-cdn.com/20160712/eff842b94c1d50d97a373573d974e680.jpg

Power mesh is super annoying to sew, make sure you use a ton of pins!

Then, I went to micheals and got 20 pounds of natural water based clay and Home Depot and got all my fiberglass resin and cloth

http://uploads.tapatalk-cdn.com/20160712/b22a95424fb343144de75daee88f9fdb.jpg

Set up my work space and traced my fluke onto the table*


http://uploads.tapatalk-cdn.com/20160712/1e63eef9df2b0d8c5bba4862069c1d8b.jpg

And then I started sculpting!*


http://uploads.tapatalk-cdn.com/20160712/fbfc5ad61c2f7b1681fd694b9d2cdecd.jpg

About five and a half hours later I had this!*

http://uploads.tapatalk-cdn.com/20160712/5b1203e47360c77c3e05a4f838b0f7ac.jpg


Then I sculpted out some scale ideas and hope tomorrow to do some fiberglass tests and sculpt some fins!*

http://uploads.tapatalk-cdn.com/20160712/f4d14bcaca1a59ac314e43b26d92822c.jpg



The crash of waves and salty air are the signs of freedom

[MermaidIndie]

So I got around to doing my scale molds and side fin just a test cause I've never worked with fiberglass before and got this!

http://uploads.tapatalk-cdn.com/20160712/6ddfc432ababd81b9bd943fecd319b88.jpg

http://uploads.tapatalk-cdn.com/20160712/c1b32434f823458199eb951725585151.jpg

So those didn't come out so well, so I tried again

http://uploads.tapatalk-cdn.com/20160712/7b5c7fee55593ba0bddadb251c912152.jpg

This came out much better and I was confident enough to take on my fluke...

http://uploads.tapatalk-cdn.com/20160712/152b16562f3a5640afabadc13093e355.jpg

So I don't have enough fiberglass but I'm getting more tonight and read that you can add more layers later on. So far it looks okay so fins crossed it comes out alright!

I chose to use fiberglass because it was much easier to find then shell shock and is cheaper but I've come to learn a few things.
No matter how careful you are it will get everywhere and on everything, including you. It dries a lot faster then one may think, and it smells, a lot. The smell also seeps into everything and settles into your house and trust me your family will not be happy about it. I would have done my fluke mold outside but I really didn't have a choice cause it was already sculpted on the table and I didn't want to risk breaking it.

I'll try and keep this thread updated and post when I finish my mold!


The crash of waves and salty air are the signs of freedom

[PearlieMae]

Saving money on supplies that stink and make everyone in your house hate you is kind of false economy, no? But, you've already got this far, good luck with the rest! :D

Here's a trick, next batch of scales, put them onto a flat layer of clay and press them down so no molding material gets under it. Then make a clay wall around the whole business and pour your resin into your 'clay bowl of scales'. Once it cures, the clay should come right off without having to dig!

[MermaidIndie]

Thanks! I'll have to try that :)


The crash of waves and salty air are the signs of freedom

[AelianaNympha]

Another tip! scraping the clay out of my resin was a real pain, but I used some vegetable oil and a toothbrush to help break down the clay and it really helped! Since your clay is water based you might could just use water and a toothbrush to break it down. :)


Sent from my iPhone using Tapatalk

[MermaidIndie]

Wow this is the first update in a long time! Life got in the way and this tail got out at the end of my list of things to do, but I just got my paycheck and I am all over getting stuff done! So the second I had money I went and got fiberglass and finished my mold,

38949
3895038951

Love fiberglass but I was literally covered in it today and no one is happy about the smell again but now I'm done so yay! Now they'll just have to deal with silicone!
Next week I'm going to look at pearl ex pigments and picking a solid color scheme, I'm so excited!!

[MermaidIndie]

Got my pigment today! Don't have pictures but I decided on a blue, gold and orange color scheme! I also decided that my scales we're going to be too small so I found a egg shaped cookie cutter and fell in love with the bigger scales.

38997

I still have to sketch out my new idea at some point, maybe tomorrow. Hopefully i will be getting my silicone by the end of this month, I'm so excited!

I have a question too, while at the store today they were out of pearl ex blue but had this other dye that they guy said could work, any experience with the kind of pigment in the picture below?

38998


The crash of waves and salty air are the signs of freedom

[PearlieMae]

I don't think it'll work with silicone, and it will stain you and everything it touches. It's a dye and it's supposed to soak into a material. Silicone encapsulates pigment, it doesn't absorb dye.

I could be wrong, but I have a strong suspicion that it's a fail.

Plus, it might inhibit curing. Only way to tell is to do a small test! Good luck!

[MermaidIndie]

Oh, that actually makes a lot of sense. I'll order pearl ex online just to be safe. Thanks PearlieMae!



The crash of waves and salty air are the signs of freedom

[Freshwater_Nim]

Dear Indie, I concur with Pearlie that it's not a very safe thing. I've made bad experiences with liquid dyes and silicone. Either it doesn't cure at all, or it cures to quickly and ends up loosing all its flexibility. Either way it Never produced a nice even color. All in all I wasted a lot of money on those tries. :D

I'd strongly advise to get dry, powder pigments for the purpose of silicone coloring.

[Mermaid Summerlilly]

Subscribed! XD

[MermaidIndie]

Yea, I'm going to stick with the peal ex to be safe, I know they work and the colors are beautiful. The only problem now is I have too many ideas for colors! I should probably finish my fluke mold first lol



The crash of waves and salty air are the signs of freedom

[Merman Ordep]

:jawdrop:I love your fluke design! and your scales design! and your side fins design! I'm following this thread :D

[MermaidIndie]

@MermanOrdep Thanks! [emoji1]


The crash of waves and salty air are the signs of freedom

[MermaidIndie]

So a bit of an update! My fluke mold is done and I've been sculpting out scales. I'm ordering my silicone on Friday, EEEEP!!! I'm so excited!!! I'll post pictures tonight!


The crash of waves and salty air are the signs of freedom

[MermaidIndie]

I ordered my silicone! I'm so excited! Next up, pigment!

[MermaidIndie]

SCREECH IT CAME IT CAME OMG IM SO EXCITED. MY SILICONE HAS ARRIVED SO MUCH FASTER THEN I THOUGHT IT WOUOD IM SO EXCITED


The crash of waves and salty air are the signs of freedom

[MermaidIndie]

Am I just an idiot or...
I cannot get the silicone bucket open, at all. I tried, I watched the tutorial video on the smooth on website for how to open it and nada. Help


The crash of waves and salty air are the signs of freedom

[PearlieMae]

the six notches on the side of the bucket lid need to be cut. I use wire cutters because they are safe than a knife. Then lift each section going around the bucket one at a time. Do this on a clean floor and keep something handy nearby to scrape it up in case you spill it.

39068

[MermaidIndie]

Thanks Pearlie! I succeeded in getting them open only to spill some all over the floor [emoji58] but! I still managed to pour 2 scales and an ankle fin


The crash of waves and salty air are the signs of freedom

[MermaidIndie]

http://uploads.tapatalk-cdn.com/20160921/068f716b05660df98f834aade3dace23.jpg

http://uploads.tapatalk-cdn.com/20160921/4cf75d2d4504df60aecad2330af6f62e.jpg

I really need to figure out my colors, still don't have a solid drawing [emoji53] and figure out how much pigment to really add...


The crash of waves and salty air are the signs of freedom

[MermaidBrandie]

http://www.rakuten.com/prod/5g-bucket-lid-opener-paint-restaurant-construction-gallon-bucket/267483943.html?listingId=343374097&sclid=pla_google_FixtureDisplaysOnline&adid=29963&gclid=CjwKEAjwgo6_BRC32q6_5s2R-R8SJAB7hTG-H7xzpKLoJXDPbrTY3iKTqYFMi_mNqfqFST_evtRqnRoCT17w_w cB

I use garden clippers to cut the notches and one of those pry tools to open the buckets. :) In case you order more silicone

[MermaidIndie]

Thanks! I'll have to try that next time [emoji1] I do have a question for all of you silicone tail makers out there. What is a green period exactly? And how long is it?


The crash of waves and salty air are the signs of freedom

[MermaidBrandie]

If you're talking about what I thibkg you're talking about, its the expiration date on the silicone. You have to use the silicone before the expiration date otherwise it cures oddly (or not at all). I left some silicone sit for a long time before using it again and it... Started curing while I was stirring it (which it was supposed to take 4-5 hours to cure) and when it did fully cure it was strange and... It looked like there was oatmeal in it.

Depending on your natural surroundings, it may last longer than the shelf life or shorter since heat/humidity/cold effects the silicone.

Sent from my E2306 using Tapatalk

[MermaidIndie]

Well that's what might Be happening to some of my silicone then cause it's seemingly curing for no apparent reason in the container, luckily it's a very very small amount and I just got new silicone


Sent from my iPhone using Tapatalk

[MermaidBrandie]

Well that's what might Be happening to some of my silicone then cause it's seemingly curing for no apparent reason in the container, luckily it's a very very small amount and I just got new silicone


Sent from my iPhone using Tapatalk
Very likely. :)

Sent from my E2306 using Tapatalk

[MermaidIndie]

Wow it has been forever since I've posted on this. I haven't touched my tail in a few weeks as life has gotten crazy and I'm lacking the funds to continue at the moment. I'm starting to get worried about new silicone in the future not sticking to the old silicone from a few weeks ago. Will this be an issue??


Sent from my iPhone using Tapatalk

[Hydra1337]

I think as long as you clean the old silicone thoroughly so there's no dirt, residue, etc. you'll be fine. Someone please correct me if I'm wrong.

[MermaidBrandie]

I think as long as you clean the old silicone thoroughly so there's no dirt, residue, etc. you'll be fine. Someone please correct me if I'm wrong.
Nope! I would super scrub it with dishwasher detergent OR dawn dish soap and 99% rubbing alcohol to be sure it's clean.

Sent from my E2306 using Tapatalk

[MermaidIndie]

That's such a relief to hear! Thanks guys!


Sent from my iPhone using Tapatalk

[MermaidIndie]

Hey y'all guess what?!

I'M BACK

My wonderful parents are getting me a whole second gallon of silicone for my birthday and I will be up and running to work on this tail in about a week! I am so excited! Keep your eyes open for new updates very soon because I will jump into high gear to finish this.

Happy swimming!


Sent from my iPhone using Tapatalk

[Misty Lau]

If you still need ideas on colors, I recommend looking at real fish and their patterns. That way, you'll know exactly what you're doing, be even more natural looking, and be even more "real". I'm obsessed when mers are a single breed of fish, or a hybrid of just two. When I can't figure out what type of fish the mer's tail is, I just think they've been mixed in breed so much that they're like mutts. Which is how rainbow tails and all the magical colored tails we have happens. That's how I like to think about it.

Anyhow, whatever you choose, or imagine, it will be beautiful, and I can't wait to see it!

[Rebela Hunter]

Good luck with your tail reboot, Indie! <3
I'll be following :)

[MermaidIndie]

Thanks for all the well wishes guys!!

So I have a question for all silicone tail makers. I sandwiched my fluke on my own and since it was my first time doing it I left serval large air pockets in my fluke and now I don't know how to fix it. If that's even possible.

Any suggestions?


Sent from my iPhone using Tapatalk

[MermaidIndie]

So! Update!

I sliced open the bottom of my fluke with a razor blade and some elbow grease. Now when I get my silicone I'm just going to paint a thin layer in with a paintbrush and more firmly secure it together. I am worried about it not sticking to my monofin and that causing more air pockets. I know there's no solid way to connect the two but has anyone else had a problem with it?


Sent from my iPhone using Tapatalk

[PearlieMae]

Try using the search function for "Lace Method"

[MermaidIndie]

So progress!!

PearlieMae, thanks for the suggestion!! I got to finish my fluke!!!!

Next! My power mesh fits perfectly with the overlay I left it over my foot pockets and I'll be attaching the two pieces soon, meanwhile I've been laying scales which has been an incredibly tedious and back hurting experience and I'm not even close to being done. The struggle is real. Anddd my five hour cure time is driving me crazy, why oh why did I not get fast.

https://uploads.tapatalk-cdn.com/20170217/076ef941bf22f45d6d554854e6595e98.jpg

This is the scale pattern I liked the best

---
https://uploads.tapatalk-cdn.com/20170217/1dcdbe2cb9aa622a8d8f72ba5bca8b97.jpg

My fluke while I'm trying to configure scales
---
https://uploads.tapatalk-cdn.com/20170217/3b98c6bc22ebb54d785768ecf6dedd5f.jpg

Ready to be scaled!

Sorry if these pictures are huge, I'm posting from my phone

Happy swimming!

[Mermaid Tula]

It's looking awesome Indie!

[Rebela Hunter]

Looks amazing so far!
Keep it up!

<3

[WaterDragon]

Looks like you have a nice warm color scheme going on :)

[Meerihua]

Subscribing! It looks gorgeous. :)

[MermaidIndie]

Aw thanks guys!!! I appreciate the well wishes! Temporary pause on work this morning but this afternoon I'm kicking back into high gear. At this rate I may be able to finish the tail in a few weeks!!


Sent from my iPhone using Tapatalk

[MermaidIndie]

Update!! I didn't get as much done today as I would have hoped but did sketch out some ideas for dorsal fins and took off all the scales I had pinned on already because I got a new idea [emoji58] but.... I realized I like the new scale pattern much better anyway and can't wait to get started on it tomorrow. I have also come to a conclusion that I for sure need to make more scale molds or this will take me a million years to finish.

https://uploads.tapatalk-cdn.com/20170219/6be2eab0e8b47237b3e40ce302a7b65b.jpg

This is the new pattern, based off a spandex tail I had made a few years back with a similar pattern. This is the one I think!

Happy swimming!


Sent from my iPhone using Tapatalk

[Mermaid Lanier]

O_O So pretty.

[MermaidIndie]

More updates! Basically I just made more scales and kept pinning lol but I really really like my scale pattern. We continue on!

https://uploads.tapatalk-cdn.com/20170220/ff79ed99be42141c6152a737e53fd181.jpg


Sent from my iPhone using Tapatalk

[Ashton]

Lookin' good

[Mermaid Wesley]

Very Pretty!

[MermaidIndie]

Slowly....... https://uploads.tapatalk-cdn.com/20170303/2689f393a6a2e73babcf7b0f70803ccc.jpg

I'm so close to finishing the front!!! Next step: silicone them all down and flip!


Sent from my iPhone using Tapatalk

[Mermaid Aria]

Slowly....... https://uploads.tapatalk-cdn.com/20170303/2689f393a6a2e73babcf7b0f70803ccc.jpg

I'm so close to finishing the front!!! Next step: silicone them all down and flip!


Sent from my iPhone using Tapatalk
Looking good! <3

Sent from my LG-D851 using Tapatalk

[MermaidIndie]

Hey guys! So I'm coming up on the final stretch of scale pouring and I'm eyeballing my silicone trying to figure out how much more I'll use. I know I have plenty to finish all my scales with some to spare. I was curious as to how much silicone some of you used for your slime coat, because I'm sort of at a loss. Thanks!


Sent from my iPhone using Tapatalk

[MermaidIndie]

Well..... I have a major major major problem. I just realized today after pinning more then 300 hundred scales on my tail that I've been pinning the front pattern to the back..... which means I basically have to take off every single scale, flip it, and rescale the entire thing



Sent from my iPhone using Tapatalk

[PearlieMae]

Ouch! I feel your pain.

Now imagine that, but with 1200 scales.

[MermaidIndie]

Oh gosh! That would be terrible!


Sent from my iPhone using Tapatalk

[MerQueen Nerissa]

I feel your pain, I had to completely re-pin my scales multiple times when I was working on my tail. It sucks, but having the tail you want makes it worth it :)

[MermaidIndie]

It really does! My mom thought I was being a little ridiculous taking them all off but now that they're all pinned on the correct side I'm so happy I did it! Even if I now have a massive knot in my shoulder lol

https://uploads.tapatalk-cdn.com/20170306/e01798c7ac6621baa4690c1393c5f8dd.jpg


Sent from my iPhone using Tapatalk

[MermaidIndie]

Omg guysssssss

IM POURING MY VERY LAST BATCH OF SCALES!!

it only took me a million years but life is life and I'm finally finishing up!! After this I just have to seal them down, do my slime coat and then omg I'm done


Sent from my iPhone using Tapatalk

[Mermaid Wesley]

Hooray!!!


Sent from my iPhone using Tapatalk

[PearlieMae]

Omg guysssssss

IM POURING MY VERY LAST BATCH OF SCALES!!

it only took me a million years but life is life and I'm finally finishing up!! After this I just have to seal them down, do my slime coat and then omg I'm done


Sent from my iPhone using Tapatalk

hehehe Welcome to my world! :mermaid kiss:

[Ashton]

You can do it!! woohoo! That final push is always exciting!

[Vela]

OOOOH I really like the colors! Congrats on almost being done!!! :)

[MermaidIndie]

So as I approach the end of this project I thought now would be a good time to take a little bit of a break and share some helpful tips and tricks I have learned over the past year. I've made many mistakes and been pleasantly surprised, so I wanted to offer some advice on how to maybe avoid the mistakes.

1. Fiberglass is the greatest thing ever. It is incredibly pungent and you get the fiberglass buzz but I have found it to be incredibly forgiving as a mold medium. (Tip) if you go with the fiberglass route get Bondo Fiberglass Filler, it'll be your best friend.

2. Craftsmart water based clay is a great clay to work with as it's very soft and you can get ten pounds at Michaels for $9.99. I've enjoyed working with it and it's definitely easy smooth out. The only disadvantage to monster makers is that is does dry out and you also can't melt it all. But I haven't had any other problems.

3. You will never have enough of anything. I thought I meticulously planned out everything I would need and ended up at Home Depot about nine times. I've somehow managed to go trough almost two full gallon orders which I don't understand either [emoji38] so be prepared to get more of everything.

4. Actual advice I didn't know I would need until I experienced it. Watch the context in which you discuss mermaid tail issues. For example, I was once standing in a Joann Fabrics and asked my mom if we had duct tape and zip ties. I was talking about a fluke extension, but by the look on the ladies face in front of me I was going to kidnap someone.

5. The UPS/Fed Ex dude will wonder why boxes with Hazard material labels are constantly in the mail to your house. He won't say it, but I see you UPS dude.

6. The smooth on reps are incredibly helpful when you get stuck with silicone issues.

7. If you or a parent or relative or someone has a Home Depot/ ace hardware card, steal it. Trust me, you will be there more often then you think purchasing a number of things such as acetone, paint thinner, packing tape, zip ties; paint sticks, drop cloths, Etc.

8. Your family/ significant other/ roommate will not appreciate the silicone in the freezer, nor that one sticky spot you can't get off the floor. Ignore them.

9. Silicone attracts pet hair like nobody's business. I've tried to keep my dogs away from my workspace as much as possible but there is still dog hair in my silicone buckets. Seriously, a dog could sneeze in Alaska and still somehow end up in your silicone in Connecticut. Accept it as a fact of life.

10. Do not put acetone in a foam cup. You think you won't do it but you will at some point. My mother did not appreciate that disaster. Also, don't forget that you have plastic measuring spoons in acetone. They dissolve.

11. Last piece of advice for now. Walk away from the project if you need to. Take a break for a few weeks, you may have a deadline but if you miss it it is okay. Take your time and be careful, you will be happier later with a mold that took you three days then a mold you rushed. One last thing. There's a great post by Mermaid Wesley (I'm so sorry if I spelt that wrong) you should really read if you are considering taking on this project. This is not easy, nor is it cheap. You will put hundreds of man hours into this project and still make mistakes, you can't be a perfectionist. Take this on if you love to craft and take on big projects and figure things out. Do it because you know you'll be challenged but it'll be worth it. Not because it's easy


Sent from my iPhone using Tapatalk

[MermaidIndie]

Also.... how does one slime coat


Sent from my iPhone using Tapatalk

[Mermaid Wesley]

Spelled right :) I'm glad to see how this is coming along! Push through!!


Sent from my iPhone using Tapatalk

[MermaidIndie]

Oh good!! Thanks Wesley!! I'm so so close!


Sent from my iPhone using Tapatalk

[Aurelian]

Definitely following this thread! Keep it up!

[Ashton]

Also, another tip you can add to you list: you can NEVER have enough free wood paint mixers. They are great for mixing fiberglass, and everything else!

[Mermaid Shaylee]

Just saw your thread! Keep up the good work! It is really frusterating to make a silicone tail, but it is so worth all of the hours in the end. I can't wait to see it finished!!!! :yay::clap:

[MermaidIndie]

Ashton, that's a great tip!! I get those at Home Depot every time I'm there, it's good to stock up!!

Thanks Mermaid Shaylee! I'm very very excited! I'm sooo close to being done!

Update: my dorsal is pulled and put together, the slime coat is on and curing and I am covered in glitter. If I can be so bold.... I would say I might finish tomorrow!! [emoji85][emoji87]


Sent from my iPhone using Tapatalk

[PearlieMae]

THIS IS SO EXCITING! :yay:

[MerQueen Nerissa]

I can't wait to see it finished, I'm sure it'll be amazing!! :cheerleader:

[MermaidIndie]

Thanks guys! That's so sweet! So update!

Slime coat is done, it's um, drippy? Sort of. I'm happy with it but some places for sure look like it got rained on.

Dorsal is done and siliconed on, It just needs some detail work and then it's done!

Then I just need to put in some filler scales where they don't quite cover the edge of my scales and I'm all set!!! I'm thinking either today or tomorrow!!


Sent from my iPhone using Tapatalk

[Ebony scales]

Watching now! Cant wait to see it done! I'm new and I am just starting to get ready for a silicone tail. I just finished my scales and was at some point going to try them out in a plaster mold.

[MermaidIndie]

I am on fire with this updates!

So I drew some inspiration from a tail raven once made for how to cover scales at the base of a dorsal fin. It works really well with my tail and personally thinks it looks dope
https://uploads.tapatalk-cdn.com/20170629/3607dd21482c3ec7d9332711074dc525.jpg

The colors are all over the place on the back lol which I do have to fix but that's okay for now. I've been saying I'll finish this tomorrow for the past three days but tomorrow is the day people!!! Here we gooooooo


Sent from my iPhone using Tapatalk

[Sea~Phoenix Savannah]

Awesome! Can't wait to see the finished tail!

[MermaidIndie]

OKAY GUYS *BREATHES* I FINISHED IT!!! ALMOST AN ENTIRE YEAR AND ITS FINISHED I AM SO PROUD OF MYSELF!

https://uploads.tapatalk-cdn.com/20170629/2fdf158e21ffccbada300267283c2525.jpghttps://uploads.tapatalk-cdn.com/20170629/3606977bceed969918bd564087dbbdff.jpg


Sent from my iPhone using Tapatalk

[Sea~Phoenix Savannah]

Congrats! It looks great!

[MermaidIndie]

https://uploads.tapatalk-cdn.com/20170629/92407a1f40406421f77d2a2a0d9badd2.jpghttps://uploads.tapatalk-cdn.com/20170629/5d013714ae1e1f921713323b8b8665cf.jpg


Sorry if these pics are huge, they're from my phone lol. This is post swim and first experience with water!!


Sent from my iPhone using Tapatalk

[deepblue]

Beautiful! I love the pattern and color scheme. Congratulations.

[MermaidIndie]

Aw thanks!! I'm so happy it's done!


Sent from my iPhone using Tapatalk

[Slim]

I love that tail

[MermaidIndie]

So the thread is alive again! I’ve been putting off this project for a couple of months because I knew how much it would hurt my soul. I had to cut the back of my tail open to resize it and am now awaiting silicone to come in the mail. Let’s hope this all plays out how I think it will


Sent from my iPhone using Tapatalk

[DancingJohari]

Gorgeous tail!!:)

Sent from my [device_name] using MerNetwork mobile app

[MermaidIndie]

Thanks @DancingJohari!!!

So it’s done! I finished up the back seam!! https://uploads.tapatalk-cdn.com/20180606/b778e543f0c4df8ccdd3e77013d56ab9.jpg

It doesn’t look the greatest but hey I can still swim in it!!!! The newest problem is I’m finding I made the waistline wayyyyy too low, and extending it is going to be a major pain in the fish *facepalm*

My feet are also slightly too wide to fit comfortably into my finis wave monofin, which is something I can’t really fix. Honestly I’m starting to think she may be better rehomed to a slightly shorter mer with smaller feet [emoji38]


Sent from my iPhone using Tapatalk

[Ashton]

I like how your sweatshirt matches your tail!

[xaccer2]

гвар (http://audiobookkeeper.ru/book/1900)

[xaccer2]

123.4 (http://cottagenet.ru/plan/688)

[xaccer2]

знач (http://eyesvision.ru)

[xaccer2]

PERF (http://eyesvisions.com)

[xaccer2]

курт (http://factoringfee.ru/t/672292)

[xaccer2]

Wind (http://filmzones.ru/t/183520)

[xaccer2]

Fran (http://gadwall.ru/t/297085)

[xaccer2]

Соко (http://gaffertape.ru/t/478363)

[xaccer2]

Перв (http://gageboard.ru/t/755131)

[xaccer2]

Soun (http://gagrule.ru/t/282398)

[xaccer2]

Elle (http://gallduct.ru/t/749943)

[xaccer2]

EXPE (http://galvanometric.ru/t/354412)

[xaccer2]

Luck (http://gangforeman.ru/t/228908)

[xaccer2]

Marg (http://gangwayplatform.ru/t/241484)

[xaccer2]

Jule (http://garbagechute.ru/t/851516)

[xaccer2]

Зуба (http://gardeningleave.ru/t/229076)

[xaccer2]

Леон (http://gascautery.ru/t/673113)

[xaccer2]

Лемб (http://gashbucket.ru/t/294679)

[xaccer2]

Герм (http://gasreturn.ru/t/795796)

[xaccer2]

Wall (http://gatedsweep.ru/t/558977)

[xaccer2]

'Коп (http://gaugemodel.ru/t/679803)

[xaccer2]

Anai (http://gaussianfilter.ru/t/674867)

[xaccer2]

XVII (http://gearpitchdiameter.ru/t/669734)

[xaccer2]

Vali (http://geartreating.ru/t/572305)

[xaccer2]

Rond (http://generalizedanalysis.ru/t/357893)

[xaccer2]

Virt (http://generalprovisions.ru/t/558602)

[xaccer2]

Lona (http://geophysicalprobe.ru/t/559247)

[xaccer2]

Puri (http://geriatricnurse.ru/t/139301)

[xaccer2]

�ерт (http://getintoaflap.ru/t/139379)

[xaccer2]

Vani (http://getthebounce.ru/t/138151)

[xaccer2]

MPEG (http://habeascorpus.ru/t/632073)

[xaccer2]

XVII (http://habituate.ru/t/669304)

[xaccer2]

Acca (http://hackedbolt.ru/t/347973)

[xaccer2]

Klau (http://hackworker.ru/t/627633)

[xaccer2]

Othe (http://hadronicannihilation.ru/t/624621)

[xaccer2]

Шамп (http://haemagglutinin.ru/t/624523)

[xaccer2]

Nive (http://hailsquall.ru/t/139738)

[xaccer2]

женщ (http://hairysphere.ru/t/449504)

[xaccer2]

Natu (http://halforderfringe.ru/t/561142)

[xaccer2]

Garn (http://halfsiblings.ru/t/561893)

[xaccer2]

�ерт (http://hallofresidence.ru/t/562238)

[xaccer2]

Hear (http://haltstate.ru/t/449514)

[xaccer2]

Sebu (http://handcoding.ru/t/565412)

[xaccer2]

Ва�и (http://handportedhead.ru/t/750328)

[xaccer2]

�ерт (http://handradar.ru/t/561511)

[xaccer2]

Rene (http://handsfreetelephone.ru/t/137913)

[xaccer2]

твор (http://hangonpart.ru/t/247296)

[xaccer2]

веще (http://haphazardwinding.ru/t/449271)

[xaccer2]

Natr (http://hardalloyteeth.ru/t/336262)

[xaccer2]

Gill (http://hardasiron.ru/t/333592)

[xaccer2]

Funk (http://hardenedconcrete.ru/t/566345)

[xaccer2]

Ð*айн (http://harmonicinteraction.ru/t/303594)

[xaccer2]

Pret (http://hartlaubgoose.ru/t/140820)

[xaccer2]

Will (http://hatchholddown.ru/t/296265)

[xaccer2]

�тих (http://haveafinetime.ru/t/330218)

[xaccer2]

Vash (http://hazardousatmosphere.ru/t/156552)

[xaccer2]

Сема (http://headregulator.ru/t/253094)

[xaccer2]

Pact (http://heartofgold.ru/t/450015)

[xaccer2]

Euge (http://heatageingresistance.ru/t/296562)

[xaccer2]

Докт (http://heatinggas.ru/t/621200)

[xaccer2]

Mike (http://heavydutymetalcutting.ru/t/323407)

[xaccer2]

Серб (http://jacketedwall.ru/t/320957)

[xaccer2]

Чали (http://japanesecedar.ru/t/305998)

[xaccer2]

Feli (http://jibtypecrane.ru/t/602119)

[xaccer2]

thes (http://jobabandonment.ru/t/602850)

[xaccer2]

thes (http://jobstress.ru/t/602835)

[xaccer2]

Ervi (http://jogformation.ru/t/607291)

[xaccer2]

Vira (http://jointcapsule.ru/t/570871)

[xaccer2]

Гром (http://jointsealingmaterial.ru/t/671784)

[xaccer2]

Stay (http://journallubricator.ru/t/168426)

[xaccer2]

Cros (http://juicecatcher.ru/t/527286)

[xaccer2]

Curt (http://junctionofchannels.ru/t/334984)

[xaccer2]

Luch (http://justiciablehomicide.ru/t/335635)

[xaccer2]

Time (http://juxtapositiontwin.ru/t/323368)

[xaccer2]

Волк (http://kaposidisease.ru/t/331042)

[xaccer2]

Blac (http://keepagoodoffing.ru/t/636165)

[xaccer2]

Zone (http://keepsmthinhand.ru/t/609511)

[xaccer2]

Hide (http://kentishglory.ru/t/636698)

[xaccer2]

Dant (http://kerbweight.ru/t/295596)

[xaccer2]

Huma (http://kerrrotation.ru/t/350503)

[xaccer2]

Пала (http://keymanassurance.ru/t/303305)

[xaccer2]

�ико (http://keyserum.ru/t/473618)

[xaccer2]

Zone (http://kickplate.ru/t/157600)

[xaccer2]

�ере (http://killthefattedcalf.ru/t/604548)

[xaccer2]

Zone (http://kilowattsecond.ru/t/605397)

[xaccer2]

Zone (http://kingweakfish.ru/t/608681)

[xaccer2]

угод (http://kinozones.ru/film/1900)

[xaccer2]

Zone (http://kleinbottle.ru/t/610619)

[xaccer2]

NBRP (http://kneejoint.ru/t/604674)

[xaccer2]

фору (http://knifesethouse.ru/t/611275)

[xaccer2]

Feli (http://knockonatom.ru/t/575343)

[xaccer2]

зака (http://knowledgestate.ru/t/604462)

[xaccer2]

Prid (http://kondoferromagnet.ru/t/373433)

[xaccer2]

вопр (http://labeledgraph.ru/t/816712)

[xaccer2]

PURE (http://laborracket.ru/t/157719)

[xaccer2]

Сыро (http://labourearnings.ru/t/283955)

[xaccer2]

кото (http://labourleasing.ru/t/403281)

[xaccer2]

Шуль (http://laburnumtree.ru/t/677487)

[xaccer2]

Nich (http://lacingcourse.ru/t/619546)

[xaccer2]

Larr (http://lacrimalpoint.ru/t/654062)

[xaccer2]

Glen (http://lactogenicfactor.ru/t/536245)

[xaccer2]

Шабр (http://lacunarycoefficient.ru/t/381333)

[xaccer2]

войн (http://ladletreatediron.ru/t/245915)

[xaccer2]

Емце (http://laggingload.ru/t/293930)

[xaccer2]

Ð*азм (http://laissezaller.ru/t/449286)

[xaccer2]

разн (http://lambdatransition.ru/t/265860)

[xaccer2]

Adit (http://laminatedmaterial.ru/t/336156)

[xaccer2]

Фран (http://lammasshoot.ru/t/302804)

[xaccer2]

Wise (http://lamphouse.ru/t/509915)

[xaccer2]

NATE (http://lancecorporal.ru/t/442886)

[xaccer2]

�кла (http://lancingdie.ru/t/172262)

[xaccer2]

Jean (http://landingdoor.ru/t/295383)

[xaccer2]

Alfr (http://landmarksensor.ru/t/665421)

[xaccer2]

и�ку (http://landreform.ru/t/479604)

[xaccer2]

Вы�о (http://landuseratio.ru/t/320912)

[xaccer2]

Миха (http://languagelaboratory.ru/t/670308)

[xaccer2]

хоро (http://largeheart.ru/shop/1827078)

[xaccer2]

Carp (http://lasercalibration.ru/shop/1782620)

[xaccer2]

LS-9 (http://laserlens.ru/lase_zakaz/1909)

[xaccer2]

Kron (http://laserpulse.ru/shop/1030617)

[xaccer2]

Crai (http://laterevent.ru/shop/1546597)

[xaccer2]

Mabe (http://latrinesergeant.ru/shop/451915)

[xaccer2]

пара (http://layabout.ru/shop/601452)

[xaccer2]

Book (http://leadcoating.ru/shop/1418597)

[xaccer2]

Соло (http://leadingfirm.ru/shop/465239)

[xaccer2]

Book (http://learningcurve.ru/shop/794827)

[xaccer2]

Exec (http://leaveword.ru/shop/1152198)

[xaccer2]

5601 (http://machinesensible.ru/shop/447154)

[xaccer2]

4500 (http://magneticequator.ru/shop/862170)

[xaccer2]

Итал (http://magnetotelluricfield.ru/shop/861990)

[xaccer2]

SQui (http://mailinghouse.ru/shop/576164)

[xaccer2]

Ð*оÑ�Ñ� (http://majorconcern.ru/shop/789031)

[xaccer2]

Pier (http://mammasdarling.ru/shop/1151826)

[xaccer2]

Прои (http://managerialstaff.ru/shop/614068)

[xaccer2]

UAIF (http://manipulatinghand.ru/shop/1175915)

[xaccer2]

хоро (http://manualchoke.ru/shop/1545182)

[xaccer2]

Д�К- (http://medinfobooks.ru/book/1900)

[xaccer2]

Clas (http://mp3lists.ru/item/1900)

[xaccer2]

Мак� (http://nameresolution.ru/shop/1532965)

[xaccer2]

кра� (http://naphtheneseries.ru/shop/1034013)

[xaccer2]

траф (http://narrowmouthed.ru/shop/463042)

[xaccer2]

Marl (http://nationalcensus.ru/shop/1206898)

[xaccer2]

карт (http://naturalfunctor.ru/shop/1031395)

[xaccer2]

3445 (http://navelseed.ru/shop/454527)

[xaccer2]

wwwr (http://neatplaster.ru/shop/1023273)

[xaccer2]

Bloo (http://necroticcaries.ru/shop/223504)

[xaccer2]

Heye (http://negativefibration.ru/shop/652683)

[xaccer2]

Mont (http://neighbouringrights.ru/shop/865817)

[xaccer2]

щети (http://objectmodule.ru/shop/472093)

[xaccer2]

Phil (http://observationballoon.ru/shop/97116)

[xaccer2]

Clor (http://obstructivepatent.ru/shop/1032738)

[xaccer2]

CITY (http://oceanmining.ru/shop/139686)

[xaccer2]

Choi (http://octupolephonon.ru/shop/571571)

[xaccer2]

ЛитÐ* (http://offlinesystem.ru/shop/1153372)

[xaccer2]

Aloe (http://offsetholder.ru/shop/1256832)

[xaccer2]

Фью� (http://olibanumresinoid.ru/shop/288376)

[xaccer2]

Петр (http://onesticket.ru/shop/584318)

[xaccer2]

запи (http://packedspheres.ru/shop/585501)

[xaccer2]

ЛитÐ* (http://pagingterminal.ru/shop/689747)

[xaccer2]

ЛитÐ* (http://palatinebones.ru/shop/690645)

[xaccer2]

И�ок (http://palmberry.ru/shop/956446)

[xaccer2]

ЛитÐ* (http://papercoating.ru/shop/683011)

[xaccer2]

Geof (http://paraconvexgroup.ru/shop/1066862)

[xaccer2]

Бара (http://parasolmonoplane.ru/shop/1708933)

[xaccer2]

Маши (http://parkingbrake.ru/shop/1177233)

[xaccer2]

Joha (http://partfamily.ru/shop/1420600)