Um will it work

[Mermaid Slaney]

I'm making a tail, later in the summer,(couple months probably)with my mom. And we are probably going to put a lot of flukes in it. Will this work? (The waves are supposed to be flukes, I had to sketch this in like 2 sec.)

http://www.chickensmoothie.com/oekaki/image/image.php?id=2835758&size=large&format=auto&rev=1495716576

[MermaidBrandie]

I'm confused. Will what work? What do you mean a lot of flukes? Like, multiple monofins? What are you asking?

Sent from my F8331 using Tapatalk

[Mermaid Slaney]

I'm confused. Will what work? What do you mean a lot of flukes? Like, multiple monofins? What are you asking?

Sent from my F8331 using Tapatalk

This tail with flukes in those areas on the tail.

[MermaidBrandie]

This tail with flukes in those areas on the tail.
When you say "flukes" do you mean all the ruffly bits? Because a fluke is the bottom fin that propels you. So when people talk about a fluke they just basically they're monofin or the silicone cover that goes on the monofin.

If you mean the ruffles then yes, ruffles will work and are fairly common on fabric tails.

Sent from my F8331 using Tapatalk

[Mermaid Slaney]

When you say "flukes" do you mean all the ruffly bits? Because a fluke is the bottom fin that propels you. So when people talk about a fluke they just basically they're monofin or the silicone cover that goes on the monofin.

If you mean the ruffles then yes, ruffles will work and are fairly common on fabric tails.

Sent from my F8331 using Tapatalk

Yeah i meant that. Thanks though! I keep having questions 'cause this is my first tail...

[MermaidBrandie]

I would pop over to the tailmaking questions subforum. They cover a lot of basic questions in there.

The main thing to remember about fabric tails is to get the right fabric. Spandex is most common, though I've used a two way stretch sequin fabric before. Just make sure you have the stretch go up and down (so it can stretch when you bend you knees) and no side to side. Typically people make the ruffly bits from chiffon, more spandex, or fringe trim.

Sent from my F8331 using Tapatalk

[Mermaid Slaney]

I would pop over to the tailmaking questions subforum. They cover a lot of basic questions in there.

The main thing to remember about fabric tails is to get the right fabric. Spandex is most common, though I've used a two way stretch sequin fabric before. Just make sure you have the stretch go up and down (so it can stretch when you bend you knees) and no side to side. Typically people make the ruffly bits from chiffon, more spandex, or fringe trim.

Sent from my F8331 using Tapatalk

Thanks! you've been a lot of help! My next questin was actually going to be what kind of fabric, so thanks :-)

[Ashton]

If you are making it out of fabric- Lycra spandex is the way to go. If you shop a Joanne's you can go to the 'swimsuit' or 'swimwear' section and it should have everything you need fabric wise.


Sent from my iPhone using Tapatalk

[PearlieMae]

Don't bother with two-way stretch fabrics. It can be done, but it's complicated. I'd only recommend two-way if you're an accomplished seamstress.

And while looking at fabric at Jo-Ann's, also check the Performance Fabrics section.

[MermaidBrandie]

Don't bother with two-way stretch fabrics. It can be done, but it's complicated. I'd only recommend two-way if you're an accomplished seamstress.

And while looking at fabric at Jo-Ann's, also check the Performance Fabrics section.
Yes I didn't use it until I had a few four way tails under my belt

Sent from my F8331 using Tapatalk

[Miyu]

A lot of people seem to confuse the word "flukes" for fins heehee XD I don't see any reason it wouldn't work, I had organza & chiffon (synthetic) fins all over my first tail! :)

A recommendation I can make for fin fabrics: spandex fins seem to create more drag than chiffon & organza.

My preferred sheer fin material is actually cheap sheer curtains from Wal-Mart! They cost less than the same amount of material purchased from the fabric store or counter, and are MUCH more durable than all the fashion sheers I've used!

My first fluke (fashion sheer) got totally destroyed when I got to go swimming for a few days (first time tailswimming), so I replaced it with sheer curtains and have been swimming with that with no damage :)

Hope this helps!

Sent from my SM-T110 using Tapatalk