I was imagining quite large, flowing fins for this tail, but I still want them to be sturdy particularly for donning and doffing the tail. I'll leave it to you to decide that balance!
Printable View
I was imagining quite large, flowing fins for this tail, but I still want them to be sturdy particularly for donning and doffing the tail. I'll leave it to you to decide that balance!
Do you mean them to be as big as Hannah Fraser's side fins on her sequins tails?Quote:
Originally Posted by Mermaid Kelda
Attachment 31457
Like this one? I like the size, but they look a bit too floppy for my taste, though that's likely because of their shape. I feel like my fin, being attached all along its length, might be more stable.
So I guess, yeah, that big!
Gotcha! I have a stiffer silicone to give the fins a little less flop...Dragonskin had a Shore Hardness of 10, and the additional platinum cure silicone I have has a hardness of nearly 40.
Sounds good to me! :)
Quote:
Originally Posted by PearlieMae
I'm glad that my suggestion could help both of you :DQuote:
Originally Posted by Mermaid Kelda
Ooooh can't wait to see that
Sent from my iPhone using Tapatalk
Thank you Arion, Merman Extraordinaire! :mermaid kiss:Quote:
Originally Posted by Merman Arion
Hey do you want me to change the name of this thread to accommodate Kelda's name change?
Yes please! I'm about to roll out a lot of updates for this tail and that would be awesome! Thanks, Wes! :mermaid kiss:
I'll do it when I get home on my laptop :)
Sent from my iPhone using Tapatalk
*so close*
Sent from my SAMSUNG-SM-G900A using Tapatalk
Title has been changed
Thanks Wesley! :)
Thank you, Wesley!
No problem :)
Sent from my iPhone using Tapatalk
Kelda! I fell down in studio like a dumbass and busted your fluke mold! I will resculpt it when we restart your tail soon...are there any changes/modifications you'd like to make? Think about it and let me know!
Signed,
Clumsy McStupidFish
OMG! Pearlie! Are you okay?? :(Quote:
Originally Posted by PearlieMae
Can you make me a tail pleaseeeee😃
Sent from my SM-S765C using Tapatalk
i am gonna go ahead and just comment real quick. just looked at your profile and see this is the very first thing you have posted since being on here. this kinda comment (especially first comment) along with no description of you in your profile except that you are male can often send off red flags to this forum. it is usually best to make an introduction thread and tell the forum about yourself first, also if you wanna buy one of pearlieks masterpieces (or any silicone tail) it is probably best you go to her website or etsy, look at her prices, decide if you can pay in full or do payments, then send an email when you are ready ^^ (advice from a mer whom will someday be owning a lovely tail from her.)Quote:
Originally Posted by cierramageeyahoo
Hey would you help me
Sent from my SM-S765C using Tapatalk
Hello! I'd suggest you look at Pearlie's Etsy shop before you start bugging her about it. Payment plans are available as far as I know. Tails are expensive and take time to make. I'd suggest you introduce yourself to the forum and look into a fabric tail. MerNetwork has information about how to make your own fabric tail if it's too expensive for you to purchase.Quote:
Originally Posted by cierramageeyahoo
All the Best,
Delphis
Oh, ouch, Pearlie! I hope you didn't seriously hurt yourself! Take care.
Eek *gives bandaids*
Sent from my iPhone using Tapatalk
Hahaha! You guys, I'm fine but the mold is toast and so is a small rack that held craft supplies. Nothing hurt on me but my dignity!
And cierramageyahoo, if you have $3500.00 onhand, you can be put into the production line-up for a tail! Current wait times are estimated at 12 to 18 months. Shall I send you an invoice for a $500.00 non-refundable deposit?
Ok
Sent from my SM-S765C using Tapatalk
But I can't pat that much because I'm very young
Sent from my SM-S765C using Tapatalk
Thank you
Sent from my SM-S765C using Tapatalk
Please confine all your replies to one window rather than hitting reply after every thought.
Perhaps you should look for a less expensive tailmaker. Being young is no excuse.
But I am
Sent from my SM-S765C using Tapatalk
Do you want me to tell you my age
Sent from my SM-S765C using Tapatalk
I believe what Pearlie meant (rather than actually doubting your age) was that it's not an excuse to get things handed to you for free/ less just because you're younger. If anything it's a perfect example why you shouldn't get a silicone tail right now, as you'll likely grow out of it very quickly and it means all the time and funds will be wasted, not to mention whatever amazing piece Pealie creates will get very little use.
Quite frankly, I don't care how old you are. I believe to be a member of Mernetwork, you have to be at least 13, unless you are a proven exception like Jazz.
The number I am most concerned with is a dollar amount. I will not reduce my prices because you are very young because I will still be doing the same amount of work and using the same amount of supplies and time and effort. Also, I will not, and you cannot, enter into a business transaction with me if you are under 18 years old.
And please don't send me any more one word private messages.
PS: please stop hijacking my thread.
Ok
Sent from my SM-S765C using Tapatalk
:clap:Quote:
Originally Posted by PearlieMae
Oh no, Pearlie! I hope it didn't hurt too much!
I will think about modifications and let you know :)
PearlieMae I have one question
Sent from my SM-S765C using Tapatalk
Seriously???Quote:
Originally Posted by cierramageeyahoo
Oh no she better don't [emoji32]Quote:
Originally Posted by cierramageeyahoo
https://m.youtube.com/watch?v=bHVNduc12PU
YouTube sez:Quote:
Originally Posted by Merman Arion
This video contains content from Viacom, who has blocked it in your country on copyright grounds.
Sorry about that.
Oh well. ;)