Does anyone have a picture of one the have made? Or can someone draw what it would look like?
Sent from my iPhone using Tapatalk
Printable View
Does anyone have a picture of one the have made? Or can someone draw what it would look like?
Sent from my iPhone using Tapatalk
Buy a cheap weight belt with quick release like this one on Amazon.
Here is a REALLY lousy photoshop sketch:
Attachment 30794
Basically you sew little hackie sacks with wights in them then sew a strap to slip through the quick release weight belt.
Ah ok! Thank you Seavanna!
Sent from my iPhone using Tapatalk
By the way, this is not how to make PRETTY weights, LOL! That is a much more complicated task that involves hiding weights behide shells. I have tried making shell shaped silicone covered weights, but they didn't turn out too well and I never tried again....
Yeah I really want to purchase one from Nerine but in the mean time I need something to practice in.
Sent from my iPhone using Tapatalk
Do you know how to use resin? If so, you can buy lead shot and wrap it in cellophance multiple times to fit in a clam shell (this way if the shell breaks the lead shot will not end up in a pool). Then sew a strong material circle about a half inch to an inch wide (like the kind of material used for weight belts). Put the circle in the shell then push the baggie of lead weights inside the circle so that with the shell laying face down there is a handle of material sticking up. Make sure everything fits within the shell then mix the resin and pour it in the shell until it has covered the lead shot and is almost to the very edge of the shell. Allow it to cure. You now have a seashell weight! If the resin isn't bonding to the shell well, pop it out and use E6000 to bond it or if it won't pop out then bond it at the edges. (You can get all of the things you need at your local craft store). Put it on a weight belt and attach some netting or greenery to hide the actual belt. Yay, seashell belt! :D You could also pour lead shot and resin in one of those twisty type of shells or conch looking shells, but you would have to figure out another way to attach it to the belt, so it would be a little more complicated.
You could also make a velcro belt where you do the same as above but E6000 velcro to teh back and add velcro to your belt. Then you don't need a quick release belt as you can rip off the velcro weights.
I have never used resin, but it is something I am wanting to learn in the very near future. They carry it at places like JoAnn's or Michaels?
Yes, they do. Or they have it at Hobby Lobby... Not sure about Joann's They have a section with molds and stuff. It will be there.
http://shop.hobbylobby.com/products/...-epoxy-840645/
http://www.michaels.com/castin-craft...=resin&start=1
It's not hard to use, especially for stuff like this. Creating molds is harder than doing this because you have to create a negative image. This is basically just pouring goop in a shell and letting it set. I have seen some resins that will bond to whatever they are up against and others that may pop put (I have used a LOT of different resins), but for this purpose whether it sticks or not to the inside of a seashell doesn't matter as you can always glue it. Just imagine it like making Jello, only it turns out hard! :)
Awesome, thank you so much!
Sent from my iPhone using Tapatalk
Thanks for all of the great suggestions!
Sent from my iPhone using Tapatalk
Hm... Those flips and turns I've been doing are so much harder to do in my merfin. Whenever I did them, I could hear cracking noises underwater! Whether it was me or the swimsuit stitches or even the merfin, I really don't know! I'll stick to using my foil over winter and hopefully, by the time summer comes along, I can do those tricks again in my merfin.
I practiced the "PUH" method for bubble rings lately with great success! Thanks to all your tips and things!
Bubble hearts on the other hand... :(
When I was in Spain I trained tricks everyday in the pool, the last trick I learned was horizontal bubble rings (more like bubble squiggles right now)
Another deep water trick, is to float upside down, lift your fluke/monofin, flap it like you're waving.
I've had a good week- learned bubble rings and mostly hearts. My next goal is to do flips gracefully- im awful. That and that trick I think I saw in this thread with the scuba diver knocking over rocks with a bubble.
Has anyone been able to jump out of the water in their tail? I have been extremely fascinated with this youtube video of a guy wearing a monofin jumping out of the water. https://www.youtube.com/watch?v=z09RmuaPyVU
How deep did you go to do the jump?
I never think to try a jump when I am in my tail or my fin but I really want to. If only one could jump constantly like dolphins do that must be super fun. :D
I've tried 2 ways to build up speed...
Both times swimming arms in front style and going fast as you can. And just as you reach the surface, make cups with your hands and scoop the water (bring arms downwards) at the same time, like you're separating a curtain. That way you'll get a little bit more height, and keep wriggling your body like you're still swimming to get that realistic out of water fish jiggle.
My breath holding isn't good so I can't do from one end of the pool to other, let alone 25m or 10m mark to get the speed.
What I can do are just little fish hops. Not a mega jump like Monofin Guy.
First way, is swim down the lane sideways and then turn towards the deeps then turn again and aim for the surface.
Second way is to go down to the bottom of the pool (2.08m depth), turn around and swim upwards in a straight line.
When landing back in the water, try to lean backwards. If you don't and end up going in straight or face first, water will go up your nose and it'll will be very painful. If you're not used to water going up your nose, it'll sting for several minutes. I wore my other goggles that day, and cried in it for 5 mins, it hurt that much! That feeling of water in the brain too, is not fun.
Adding too, not recommended for bikini, seashells, or other wearers of two pieces. Leaping out of the water will unleash your parts...
If still insisting on said garments, just before you land back in the water, cross your arms tightly over your chest and pinch your nose tightly so the water don't rush up there upon landing. I wear a snorkel mask and a one piece suit, but I still cross my arms. Water pressure makes things jiggly in a very revealing way. Might not be the case if you have an underwire swimsuit, but better to be safe than super embarrassed!
In any case, it will attract everyone's attention. You'll have the lifeguards eyeballing you from the other side of the centre...:$
I'm thinking the best way to build up speed for when I do have that core strength is to do laps in circles, facing inwards so the turns are easier to do and won't hurt my back. After getting the speed, do a sharp turn, one that aims for the surface, and use speed and buoyancy (I'm super floaty!) to get that extra height.
I've never been able to jump out of the water in a pool.
I just cannot get the necessary momentum- I need at least 6 or 7 metres to build up enough speed, and no pool is that deep.
Going horizontal and then trying to jump is not going to work in my experience, the best you can get out of that is a little breach of the upper body, and the tail coming out when your chest has already submerged again.
I did a full jump once in a lake, I didn't have a line though and thus don't know how deep I was, but I estimate 7-8 metres.
I got out all the way somehow, no idea how it looked because no one was filming it.
I can get it work if I swim upside down facing up, and arched the upper half of my body upwards and use momentum to jump out of the water. In any case, like I said, its fun to do even if you can't go very high.
Adding my trick to the thread! Basic Tripod headstand from yoga, but looks awesome when floating on a paddleboard with a mermaid tail! Would be more difficult with a silicone tail b/c of all the extra weight, but I bet it can be done.
Attachment 35580
Attachment 35581
Me and my MerMom!
I'd love to know if this handstand is possible with a silicone tail (multiple times in a row, unassisted, without breaking or hurting anything...)
If someone manages, please do tell.
This could change my stance towards silicone tails in waterballet (which is atm, they're too heavy to use).
Thanks! I do a lot of yoga. I must warn that there is a lot of buildup to learning how to do a headstand correctly. There is great danger to the neck and spine if done improperly so DISCLAIMER: If you do not already do headstands in your practice, do not try this at home. Go to a yoga class and ask the teacher to assist you. Once you're comfortable, it's a matter of learning how to get up with both feet stuck together (start on your knees and use core strength). On a paddleboard I don't even know how I do it, the first time I just copied my yogi girlfriend and was like WTF it worked! Years of surfing somehow transfers when you're upsidown I guess.
Technically speaking though it should be possible in a silicone tail. I don't have one yet but I imagine one could build up to the weight until it's comfortable. Doing it on beach sand would lessen the pressure on the top of the head.
What I really want to get to is Scorpion Pose, this would be the bomb in a tail:
oh, scorpion pose looks fintastic.
I'm gonna practice that-
in a fabric tail xD
I imagine the only way to possibly achieve this in a tail would be from a headstand, allowing the feet to come over then arching the back and transfering weight into elbows, then lifting the head up. This is how I originally learnt elbow scorpion but nowadays I kick into it, which isn't possible at all with a tail!
Sent from my HTC_PN071 using Tapatalk
Hmm yeah I've always kicked into pinchamyrasana/scorpion. Never heard of a transferring from the elbows variation but would have to figure it out I guess. In my morning yoga flow today I'm starting to analyze what poses could have a tail version haha. I really want to create a mermaid flow, but probably most of it will be breath holding pranayama exercises!
Sent from my iPhone using Tapatalk
I just started really getting into yoga, although I've taken random yoga classes for years. This is the first time I've really loved it. But I would LOVE to be in a place where I could do yoga on a paddle board. Dreams.
Ok so I have a question for those of you who swim regularly in pools - I'm currently trying to work out a good way to fluidly turn around in my tail and remain underwater when I get to the edge of the pool (so that I can keep swimming in the other direction like a lap swimmer does). I am just wondering what type of turns you use?
Today I was playing with a few things - first the classic forward flip to twist but I dont like it because my tail ends up sticking in the air which then looks and feels awkard when I do the twist. Then I figured out this other method which is to do the twist first (so facing upwards) then do a forward flip 180 degrees under water. I'm thinking this one has the most potential once I get it a bit smoother with more practice. There is also the sideways turn but I dont feel comfortable doing it in a narrow pool lane.
Sent from my HTC_PN071 using Tapatalk
I do a sideways turn with a downward angle, sort of turning on a diagonal. But my current tails are not HUGE
Sent from my iPhone using Tapatalk
If you try to do a flip turn, you will have to adjust your turn distance to the wall because your monofin extends the length of your legs to the wall. The downside of doing a flip turn is that if you are using a fiberglass monofin like the Finis Shooter, Trainer, or Competitor--you may "thwap" the fin blade against the pool edge and crack or break part of the fin blade. The jagged fin blade could cut into your fluke--big problem if you have a fabric tail. If the pool you swim in has lane lines, the safe thing is to stop short of the wall (maybe 2 to 3 meters before), stop swimming; grab the lane line with one hand, and get in a vertical position with your head and above water and your tail and fluke pointing downwards in a straight vertical position. Then do a fin-first vertical dive, level out, and swim back to your starting point. I usually start at the shallow end, go to the deep end, and return to the shallow end where I started. Good luck!
I'm trying to do a flip without touching or pushing off the wall. Early on when I started swimming at my local pool I was trying the thing where you push off the wall with your feet (which in this case would be my fluke), however because I have a fabric tail the rough edges of the pool wall absolutely murdered my poor fabric tail and it ended up with several holes in it. Needless to say I vowed not to try that again!
I push off the wall with my hands and do a sideways turn.
I use sculling for turns and most other movements.
It's not as fast as pushing off the wall, but I don't have to touch it in case the surface is icky.
In regards to turning, I either do a normal back flip (not a flip turn used for lap swimming) or a use s finning/sculling motion and rotate using my arms. Now mind you, I have an ENORMOUS fluke with a competitor monofin inside.
I never push off the wall, but again that's also due to the size of my tail.
Sent from my iPhone
Tricks that I consider myself good at include backflips, bubble rings (I recently mastered perfect bubble rings that grow as the surface without breaking up!), bubble kisses and bubble hearts. I'm a bit out of practice with bubble hearts at the moment.
I'll post video below
https://instagram.com/p/BGI3apcMAcX/
Back flip in my current tail. Wearing a nose clip since it was just practice. I typically use a SinusSaver for this.
https://instagram.com/p/6vcNF8sAZM/
Bubble kiss.
http://uploads.tapatalk-cdn.com/2016...cade4cf8e0.jpg
Another shot of me mid-bubble kiss. I kinda like this. Although I was unaware I made a scrunched face when I did it.
I will update this post when I find my bubble ring and bubble heart clips
Sent from my iPhone