Results 1 to 4 of 4

Thread: Attaching sequins to silicone?

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Senior Member Pod of Oceania The Water Phoenix's Avatar
    Join Date
    Nov 2015
    Location
    Perth, Western Australia
    Posts
    574

    Attaching sequins to silicone?

    Hello merfriends!

    I've been contemplating making an extended tail, like the way JMBFXStudios made tails for Aquamarine/H20, etc for a loooooong time and I've always been coming up with various concepts. I think I've created an extended monofin concept that I'm confident that'll be efficient to swim with. What I want to know is it possible to glue those plastic shell sequins to silicone? I've seen a tailmaker who makes gorgeous replica h2o tails with a similar method, as the scales are all individually glued down. Of course I'll do tests before I make the actual tail, but I'm wanting to get a realistic look and feel. Here's the tail that I'm talking about, that uses the sequins as scales, and they also look to have been sealed.

    Any tips will be greatly appreciated!
    Be the pilot of your dreams

    **The Water Phoenix: A Western Australian mer**

    Instagram: thephoenixmer



  2. #2
    You can't glue anything with sharp edges (like sequences) to silicone as it will cut the silicone. And no glue or nothing will stick to silicone unless it's the same silicone as the base

  3. #3
    Senior Member Undisclosed Pod
    Pod of New England
    Marinus Mortimer's Avatar
    Join Date
    Sep 2011
    Location
    Holyoke, MA
    Posts
    1,169
    Add Marinus Mortimer on Facebook
    Visit Marinus Mortimer's Youtube Channel
    Fen is correct. However. It will cut the silicone if bent for extended periods of time. For sure! But it could look pretty if you sow them in. Use caulk silicone which does stick to plastic, to glue the sequins in place after you sow them I suggest u glue them down to prevent them from lifting me cutting the outer layer of clear dragons skin.

    So hereís the plan, sow them by hand so the placement is beautiful and in pattern, after you sow one down use the caulk gun and a butter knife take a drop on the tip of knife lift the scale a bit apply silicone under the scale press it so excess comes out clean up excess with spoon by spreading it downwards which will make it easier for the new scales to stick to the neoprene I say neoprene because itís the only viable and durable choice for this. After they are all down sown and glued. You can apply a top coat to the tail in dragon skin with no color but with fine sand like glitter so make it shimmer this will give it dimensions.

    I say test this in a small piece of fabric maybe a square foot test it under pressure test it with for extended periods of time while folded in half test test test then if itís durable enough go for it. Iíve had this idea for my extended tail aswell but huge silicone scales are easy to adhere and fill up such a long tail.
    Hope this helps much love


    Sent from my iPhone using Tapatalk
    Marinus Mortimer
    formerly known as:
    Merman Marinus


  4. #4
    Member Princess of the sea's Avatar
    Join Date
    Jun 2018
    Location
    Swimming in the ocean
    Posts
    69

    Visit Princess of the sea's Youtube Channel
    funny seeing flounder scales's tail here, I think he used a lot of his techniques from my youtube video never really credited me for it but ok) I personally handsewn all scales on and the added a bit of silicone to the tips to prevent them from going anywhere and as extra strength. It definetly works very well to me! You can also try using the sewing machine to sew them on fast, I saw nymph_marielle doing that on instagram. I'm not sure how well that stays on tho

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •