Results 81 to 82 of 82

Thread: The official HOW TO PUT ON YOUR MERMAID TAIL thread

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Senior Member Undisclosed Pod
    Join Date
    Jul 2011
    Posts
    14,650

    The official HOW TO PUT ON YOUR MERMAID TAIL thread

    From my series: What to expect with your first mermaid tail: http://mernetwork.com/index/showthre...our-first-tail

    How to put on your mermaid tail:

    Fabric or ONLY NEOPRENE With Swim Fins or Monofins.


    1.Put your monofin or swim fins in the fluke pocket by rolling the fabric down as far as it goes. You may need to slightly bend your monofin to get it in. Don't apply too much pressure- you don't want the monofin to snap. You may find it helpful to have a second pair of hands. One pair to hold the tail open, the other to put in the fins.

    2. Once the fins are in roll the fabric down so that it's folded and not bunched, as far down as it'll go, CAREFULLY. Do not do this over a rough surface, as when you begin to move around you may damage the material. Put a yoga mat or tiled floor beneath you. If you have extra fins on your fabric or neoprene, be very mindful of how you fold things down because you don't want to damage them, and also, you don't want to damage them when you unroll it either.

    3. Once the fabric is rolled down, start with one foot. Put it into the fin pocket. If there are straps, be sure they're adjusted to fit comfortably. Monofins and fins can be uncomfortable to a degree- that's normal. If the straps are too uncomfortable you can put a thin piece of foam on them. Once one foot is in- expect the second to be more difficult. Put it in like before. You will find it harder because of the narrow space- THIS IS NORMAL. Take your time. Don't rush. Wiggling around too much is what ends up damaging a tail. If you need to tie a piece of string to the straps that you can use to pull the strap out for your heel. If it's really tight, lubing up your feet can help. 4. Start unrolling the tail once both legs are in. Slowly, take your time, and smooth out wrinkles as you go. Get a second pair of hands as you need to. This is not a race. You will learn to get your tail on faster as you get comfortable, for now, take it slow or you WILL damage it. IF you get your tail to your butt and have trouble (getting over bathing suit fabric can be hard) you may want to get some help to carefully stand or lean in your tail. ONLY DO THIS IF YOUR TAIL IS STRONG ENOUGH TO BE STOOD IN. Then you can have someone help you pull the rest of the tail up like a pair of pants.

    IMPORTANT TIP: Sometimes neoprene is easier to get on dryer. Wearing a pair of tights underneath can help you slide it on, or putting baby powder on your legs too.

    Latex or Silicone with Neoprene Backing


    1. Roll the latex or silicone down. THIS IS TRICKY BECAUSE IT'S THICKER. If you're not careful and pull too hard, you can cause fraying at your waist line, or make the neoprene separate from the silicone or latex. I find it worked best for me when I folded it down in increments. Do not do this over a rough surface, as when you begin to move around you may damage the material. Put a yoga mat or tiled floor beneath you. If you have extra fins on your neoprene, be very mindful of how you fold things down because you don't want to damage them, and also, you don't want to damage them when you unroll it either.

    2.Once the neoprene is folded all the way down, start with one foot. Put it into the fin pocket. If there are straps, be sure they're adjusted to fit comfortably. Monofins and fins can be uncomfortable to a degree- that's normal. If the straps are too uncomfortable you can put a thin piece of foam on them. Once one foot is in- expect the second to be more difficult. Put it in like before. You will find it harder because of the narrow space- THIS IS NORMAL. Take your time. Don't rush. Wiggling around too much is what ends up damaging a tail. If you need to tie a piece of string to the straps that you can use to pull the strap out for your heel. If it's really tight, lubing up your feet can help. 3. Start unrolling the tail once both legs are in. Slowly, take your time, and smooth out wrinkles as you go. Get a second pair of hands as you need to. This is not a race. You will learn to get your tail on faster as you get comfortable, for now, take it slow or you WILL damage it. IF you get your tail to your butt and have trouble (getting over bathing suit fabric can be hard) you may want to get some help to carefully stand or lean in your tail. ONLY DO THIS IF YOUR TAIL IS STRONG ENOUGH TO BE STOOD IN. Then you can have someone help you pull the rest of the tail up like a pair of pants.

    IMPORTANT TIPS: Sometimes neoprene is easier to get on dryer. Wearing a pair of tights underneath can help you slide it on, or putting baby powder on your legs too. Neoprene can separate from silicone or latex because of general wear and tear, because of the way you're rolling it up or down, or if it's forced to stretch too much.

    RECENT TRICK I LEARNED:

    Use a towel to help you pull up the tail, pull the waist, or smooth out wrinkles on silicone tails. Just put the towel between your hands and the tail and grip THROUGH the tail. Gives you a better grip than bare hands, and prevents you from poking holes with your nails or accidentally tearing.


    Pure Silicone or Latex With Mesh or No Backing

    1. Roll the latex or silicone down. THIS IS TRICKY BECAUSE IT'S THICKER. If you're not careful and pull too hard, you can cause fraying at your waist line, cause cracks in the silicone or latex, or little holes. LONG NAILS WILL CAUSE HOLES IN YOUR SILICONE OR LATEX. They poke through. Silicone and latex are also very sticky, and will stick to anything around you like sand. Do not do this over a rough surface, as when you begin to move around you may damage the material. Put a yoga mat or tiled floor beneath you. If you have extra fins on your tail, be very mindful of how you fold things down because you don't want to damage them, and also, you don't want to damage them when you unroll it either.


    2.Once the tail is folded all the way down, start with one foot. Put it into the fin pocket. If there are straps, be sure they're adjusted to fit comfortably. Monofins and fins can be uncomfortable to a degree- that's normal. If the straps are too uncomfortable you can put a thin piece of foam on them. Once one foot is in- expect the second to be more difficult. Put it in like before. You will find it harder because of the narrow space- THIS IS NORMAL. Take your time. Don't rush. Wiggling around too much is what ends up damaging a tail. If you need to tie a piece of string to the straps that you can use to pull the strap out for your heel. If it's really tight, lubing up your feet can help.

    3. At this point you'll either need to be wet, or lubed, or both. Silicone and latex will stick to your skin and bathing suit. You can lube up with different things depending on your tail. Sex toy lube is great but make sure you buy the right ones. Silicone lube can't be used on silicone products or it'll bond. Simply read the labels or the websites to find out which type works for which material. You can also use diluted mineral oil, or all natural body lotions and creams. Get them all over your entire legs and bathing suit bottom. Alternatively, you can try a pair of tights that have a sheen and get them soaked first. The sheen will often allow you to slip in, but also give them silicone something to stick to when you swim and prevent gaping.

    4. Start unrolling the tail once both legs are in. Slowly, take your time, and smooth out wrinkles as you go. Get a second pair of hands as you need to. This is not a race. You will learn to get your tail on faster as you get comfortable, for now, take it slow or you WILL damage it. IF you get your tail to your butt and have trouble (getting over bathing suit fabric can be hard) you may want to get some help to carefully stand or lean in your tail. ONLY DO THIS IF YOUR TAIL IS STRONG ENOUGH TO BE STOOD IN. Then you can have someone help you pull the rest of the tail up like a pair of pants. The best way to get in on it either right in the water, or lying down flat and pulling it up.

    RECENT TRICK I LEARNED:

    Use a towel to help you pull up the tail, pull the waist, or smooth out wrinkles on silicone tails. Just put the towel between your hands and the tail and grip THROUGH the tail. Gives you a better grip than bare hands, and prevents you from poking holes with your nails or accidentally tearing.

    MOST OF THE DAMAGE THAT HAPPENS TO TAILS, HAPPENS WHEN YOU PUT THEM ON, TAKE THEM OFF, AND DON'T CLEAN THEM RIGHT AWAY. Some wear and tear is 100% normal, these are COSTUMES not solid prosthetic.Consider that for h20 and Splash each tail needed to be repaired after each swim, and sometimes there were multiple tails for multiple scenes. SO it's normal, even though you paid a lot of money, even though it's expensive materials, for tails to have wear and tear even after a few swims. It's all in how you maintain it, how you use it and wear, and how you're putting it on and off.

    Don't bug other mermaids to make videos of themselves putting tails off and on. Most people look awful doing it because we have to crouch all over. There are already several videos online for putting on tails you can google.


    Edit: another video



    Also, You can see mermaid Ama put her tail on in this video clip:


    And see Naida put the same tail on here:
    Last edited by AniaR; 02-25-2015 at 07:34 PM.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •